Stealth Fighter Series

Front Bumper

Addictive Desert Designs Stealth Fighter front bumper for the vehicle is one of tightest fitting and most aggressive looking bumpers on the market. Measuring only 1/2" farther from the grille than the factory bumper the Stealth Fighter gives your vehicle a tight fitting steel plate designed bumper. A modern radius plate design allows the Stealth Fighter to keep a tight fit around the front of your truck to match the factory design, while giving you the added protection of a steel plated bumper. The center of the bumper has a universal light mount system that allows you to mount up to 10 cube lights or a 40" radius or straight LED, or anything in between to give your vehicle the additional lighting setup that you need. Additional mounts for RIGID 10" SR LEDs behind the side panels give your vehicle even more lighting options.

Features:

• Fully boxed frame horns
• .120" wall steel tube construction
• Laser cut skid plates, tabs and plates for a precise fit
• Direct fit – no cutting or welding required
• Stainless steel hardware
• Hammer black powder coat bumper finish
• Satin black powder coat panel finish
• Made in the USA

Rear Bumper

The A.D.D Stealth Fighter Bumper makes your truck look fast, even while standing still. By combining the tubing of a traditional pre-runner bumper and the encapsulating panel design, it gets a very innovative style that leaves jaws dropping everywhere you go.

Features:

• Direct fit – no cutting or welding required
• Uses factory hardware to bolt on
• Backup sensor cutouts
• Uses factory hardware to bolt on
• Rigid SR-M Flush Mounts
• Hammer Black powder coat bumper finish
• Made in the USA

HoneyBadger Series

Front Bumper

The new HoneyBadger Front Bumper is just as durable as it is versatile. Its wrap-around design, laser cut finish, and 3/16" Mild Steel Construction offers precision built quality along with added strength. . Mix and match any brand and size lights with the universal light kit to create the perfect lighting combination for your needs. Additional lighting options are available behind the side accent panels. Accepting a Rigid Industries 10" LED on each side.

Features:

• Universal light mount
• 10" LED mounts behind side panels
• Vented skid plate to maintain airflow
• 100% direct bolt-on
• Better approach angle
• Superior protection
• Requires Adaptive Cruise Control relocation bracket for adaptive cruise control equipped vehicles
• Frame reinforcement kit recommended if using D-Rings or Winch
• Hammer Black powder coat bumper finish
• Made in the USA

Rear Bumper

The HoneyBadger rear bumper is one of ADD toughest rear bumpers yet. Made with 1/8" external steel plating and 3/16" internal structure plating in a modern box design provides superior rear end protection. Designed to retain the factory dual exhaust and tow hooks the form fitting bumper factory dovetail style. Reinforced clevis mounts made from 1" steel are designed to accommodate a 3/4" D-ring for additional utility. Give your vehicles additional rear lighting with dual Dually mounts built into the bumper as well as mounts for 10" LED bars behind the side accent panels. Dimple died step plates on the top of the HoneyBadger bumper provide a better surface for footwork. The HoneyBadger maintains compatibility with factory backup sensors.

Features:

• Tow hooks
• Lockable storage space
• Dually light mounts
• Hammer Black powder coat bumper finish
• Satin Black powder coat panel finish
• Made in the USA

Race Series R

Front Bumper

The Race Series “R” Front Bumper has an aggressive design with Baja proven functionality. Designed with optional cooling vents to help with cooling in extreme environments. The skid plate design helps protect the radiator, steering and lower engine components. Made with an option for 10 individual cube lights or the new 40” radius light bar on top and options for a 20” LED behind the lower plating or a winch, this bumper provides plenty of options for your adventures.

Features:

• Formed front tube allows for a tight front end fitment
• Great approach angle with added ground clearance
• .120" wall steel tubing for strength & durability
• CNC laser cut panels ensure precise fitment
• Aluminum paneling helps save weight
• Direct bolt-on
• Hammer black powder coat bumper finish
• Satin black powder coat panel finish
• Made in the USA

Rear Bumper

The Addictive Desert Designs Race Series “R” Rear Bumpers bring race inspired look and feel to the real world. This bumper incorporates a wrap around design for maximum body protection while maintaining clean lines plus offers no sacrifices to your factory receiver hitch. From start to finish this bumper is the complete package.

Features:

• 100% Bolt on and no cutting of the frame is required
• Factory tow hooks remain along with all the factory components that go in the factory rear bumper
• Availability of adding extra back up lighting
• Hammer black powder coat bumper finish
• Made in the USA

Venom R Series

Front Bumper

The Addictive Desert Designs Stealth bolt-on Bumper is a hybrid design of A.D.D. traditional Standard Pre-Runner Bumper, while incorporating the enclosure style of the Venom Bumper. When designing this front bumper they wanted to keep the look of a Baja Truck, yet make the bumper clean and finished.

Features:

• Fully Boxed frame horns
• 120" wall steel tube construction
• Laser cut skid plates, tabs and plates for a precise fit
• Direct fit – no cutting or welding required
• Stainless steel hardware
• Hammer Black powder coat bumper finish
• Satin Black powder coat panel finish
• Made in the USA

Rear Bumper

The Venom Rear Bumper features an extremely strong and durable construction and even comes with a corrosion-resistant Black Hammer Tone powder coat finish. The bumper has provisions for rear-facing LED lights and can be fitted with optional mounts for backup sensors. As with all A.D.D. bumpers, everything is 100% bolt-on meaning no cutting or welding is required allowing you to re-install your stock bumper if needed.

Features:

• .120" wall steel tube construction
• Laser cut skid plates, tabs and plates for a precise fit
• Direct fit – no cutting or welding required
• Stainless steel hardware
• Bumpers are designed to work with factory tow equipment
• Hammer Black powder coat bumper finish
• Satin Black powder coat panel finish
• Made in the USA

Stealth R Series

The Stealth R front bumper for the Chevy Silverado 1500 and GMC Sierra 1500 takes our Stealth style bumper and slims it down with radius tubing. Built with .120 wall steel tubing and 1/8" aluminum accent panels and skid plate, the Stealth R for the Chevy/GMC 1500 is built to withstand off-road adventures. A universal light mount system inside the top hoop allows up to 10 cube lights or a single 40" radius LED bar to be installed, to give your truck extra lighting for night expeditions. Mix and match any size and brand light to create multiple lighting combinations to best suit your off-road needs.

Features:

• Expertly crafted from premium materials
• Designed to match rigorous quality standards
• High quality at a budget-friendly price
• Hammer Black powder coat bumper finish
• Satin Black powder coat panel finish
• Made in the USA

Dimple R Series

Rear Bumper

The Dimple-R™ Rear Bumper is a great upgrade for truck owner that wants an aggressive off-road look with a no hassle 100% bolt on installation. The Addictive Desert Designs Dimple-R™ Bumpers are designed to utilize two cube style LED lights for extra rear lighting and maintain full functionality of the factory rear hitch and spare tire access.

Product lines

Features:

• Retain Factory Receiver Hitch
• Durable yet lightweight for added style, protection, and longevity
• Full-width design for maximum protection against anything the trail can throw at you
• Guaranteed to fit your specific vehicle with no modifications
• High-quality, durable powder coating for long-term protection and style
• Proudly designed and manufactured in the USA

Bomber Series

Front Bumper

The Addictive Desert Designs Bomber Front Bumper is the ultimate combination of form and function. The modern plate steel face of the bumper gives an aggressive styling, while the full 3/16" aluminum skid plate allows the Bomber to be lighter than the OEM bumper. The Bomber is offered in three varieties: with 4 Rigid 360 6" light mounts, 3 Baja Designs LP6 light mounts or 20" LED Lights in the center. Additional cube light mounts on each side of the bumper give even more lighting options. OEM tow hooks are retained for added utility. As always, this bumper is fully bolt-on and made in America.

Features:

• Heavy-duty construction for aggressive looks and protection in the most demanding conditions
• Full-width design for maximum protection against anything the trail can throw at you
• Guaranteed to fit your specific vehicle with no modifications
• High-quality, durable powder coating for long-term protection and style
• Proudly designed and manufactured in the USA

Rear Bumper

The Addictive Desert Designs Bomber Rear bumper features a clean, modern look. The plate steel construction offers strength, while remaining low profile. The angles meet perfectly with the body lines of the vehicle to make it look as though it was there from the factory. Give your Ford Raptor additional lighting with the two standard rear facing cube light mounts. Factory amenities such as parking sensors, tow hitch, and dual exhaust are all retained. As always, this product is fully bolt-on and made in America.

Features:

• Full-width design for maximum protection against anything the trail can throw at you
• Guaranteed to fit your specific vehicle with no modifications
• High-quality, durable powder coating for long-term protection and style
• Proudly designed and manufactured in the USA

Lite Series

Front Bumper

The Addictive Desert Designs Lite bumper is stout, yet easy on the wallet. This bumper features brand new patent pending Universal Lighting System. This will allow you to put several different types of lights and configurations on your bumper. You can now mount radius bars, straight bars, and cubed lights. Mix, match, and make combo choices. The Addictive Desert Designs Lite bumper contours the front of you truck, includes a low profile skid plate that does not attach to the truss, which allows for a suspension kit to be installed. Like all Addictive Desert Designs products, this is 100% bolt on.

Features:

• Durable yet lightweight for added style, protection, and longevity
• Full-width design for maximum protection against anything the trail can throw at you
• Top hoop for added front-end protection
• Guaranteed to fit your specific vehicle with no modifications
• High-quality, durable powder coating for long-term protection and style
• Proudly designed and manufactured in the USA

Pro Series

Front Bumper

Combining aesthetics with functionality, the ADD PRO frame cut front bumper doesn't sacrifice the look of your truck for approach angle. ADD PRO bumper is the first true high quality frame cut bumper for the Ford Raptor giving your truck maximum approach angle for your off-road adventures. The ADD PRO front bumper truly contours the body lines of the Raptor without the need of a plastic valence. Built with .120" wall steel tubing for strength and durability and an aluminum skid plate for protection. Mounting options for lights underneath the main tube to keep them tucked away allow for up to 7 cube lights or a 20" radius LED bar.

Features:

• .120 Wall Tube and 3/16" Heavy Duty Steel
• Durable yet lightweight for added style, protection, and longevity
• Full-width design for maximum protection against anything the trail can throw at you
• Top hoop for added front-end protection
• Guaranteed to fit your specific vehicle with no modifications
• High-quality, durable powder coating for long-term protection and style
• Proudly designed and manufactured in the USA

Rear Bumper

PRO Series Full Width Rear Bumper by Addictive Desert Designs®. Complimenting the styling and aesthetics of the ADD PRO frame cut front bumper, ADD PRO Rear bumper matches the slim look the PRO offers for the rear of your truck. Built with .120" wall steel tubing for strength and durability and an aluminum top plate for style.

Features:

• Durable yet lightweight for added style, protection, and longevity
• Full-width design for maximum protection against anything the trail can throw at you
• Top hoop for added front-end protection
• Guaranteed to fit your specific vehicle with no modifications
• High-quality, durable powder coating for long-term protection and style
• .120 Wall Tube and 3/16" Heavy Duty Steel

• 

  PRO Black Front Light Moun
• 

  PRO Black Rear Pre-Runner Bumper
• 

  PRO Front Pre-Runner Bumper with Hoop