Vehicle Fitment
This part is universal
Product Details
Universal 220 V to 240 V Heated Tire Groover (ALL10590) by AllStar Performance®. Allstar Heated Tire Groover 220-240V. Groovers add extra traction in minutes. Tapered, razor sharp blade grooves fast and easy. To operate, insert a blade into groover, set blade height with a tire depth gauge and set the power level. Trigger-less activation by placing the cutting edge against the tire surface and apply pressure to activate rocker switch, built into head, creating instant heat.
Notes
- Intended For International Use.
Specifications
| Voltage: 220V to 240V |
Includes
- Flat Blades: 4/32", 6/32", 8/32" and 10/32"
Features
- Precise manufacturing and high-grade materials
- Exceptional performance at a competitive price
- Stringently tested with the highest quality standards
- Designed to help to get your job done right
- Manufactured utilizing the highest quality materials
- Built to provide exceptional levels of durability
BLADE INSERTION - Loosen the lever. The position of the lever may be adjusted by pushing the lever in and rotating it. Insert the blade between the spacers at a position that is roughly centered in the head. Blade depth can be accurately set by using a tire depth gauge. Avoid inserting the blade legs next to the thick black center spacer. If it is necessary to do this in order to cut a narrower groove, the center spacer may have to be replaced periodically. Tighten the lever firmly. Do not over tighten.
POWER LEVELS - Rubber durometer, blade size, depth of cut, and speed of cut are all variables that will affect your power level selection. Power level 4 is the least commonly used setting. Always cut at the lowest possible power level. Avoid smoke as this shortens blade life. A sharp blade will allow you to cut easier, faster, and with less heat. A dull or damaged blade should be replaced. IMPORTANT: For optimum performance and longevity of the groover, use only ALLSTAR replacement blades.
GROOVING - Place the cutting edge of the blade against the rubber. The groover will automatically activate when the operator applies cutting pressure. Allow the front slide pads to position the tool at the proper cutting angle. Most tire grooving is done with only the two front slide pads riding on the tire surface. The rear slide pad is only useful when cutting across soft tires, such as some racing tires, where the give of the tire may allow the rubber to contact the rear slide pad. The most common way to cut a zig zag groove is by an off and on action at the intersections. However, at low power settings, these same cuts can be made with a continuous action by maintaining cutting pressure through the intersections.
AllStar Performance® The key to success in a car building project is access to high quality, reasonably priced parts that get the job done right. Each AllStar part is the result of dedication to research and development. Once a need is established, parts are designed and manufactured by talented craftsmen, many of whom are racers and hot rodders themselves. Many AllStar Performance parts are one-of-a-kind; you won't find them anywhere else.
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!