Universal 3.1 qt Pressure Brake Bleeder by CTA®. When it comes to quality, CTA knows no compromises. All the products made by this stringent quality control conditions. The latest manufacturing methods coupled with the use of the highest-grade materials ensure the closest tolerances are adhered to.
|Capacity: 3.1 qt|
|Pressure Gage: 0-70 psi|
- Creates pressure to push brake fluid through the system
- Updated longer, 10 foot hose with Nitto quick-disconnect coupler for long reach
- Specialty tools to get your job done in a safer and easier fashion
- Practical and efficient solutions for pros and DIYers alike
- No more headaches, beard scratching or tool throwing
- Blend of exceptional quality, convenience and functionality
- Made from superior grade materials to be lightweight yet durable
- 3 liter capacity tank with pressure release valve
- Filling home with screw cap
Safety Caution: Brake fluid is corrosive. When fluid spills, use water to flush away immediately. Filling Procedure 1. Make sure no pressure remains inside the unit. Pressure can be release from the release valve by the side of the pump. 2. Remove new fluid cap on top of the unit, and fill the unit with new brake fluid. Make sure no remaining old fluid or debris in the tank. Operating Instruction 1. Select suitable adapter from the selection provided with the unit. Install adapter to the master cylinder of the brake system. 2. Pump handle of the unit until reach recommended bleeding pressure. Open brake nipple and connect to suitable bleeding container. Once seeing the new fluid coming into the container, close the nipple. Repeat process on all 4 wheels (in any order). 3. Once the process is complete, release the pressure by pressing down the release valve by the side of the pump. After releasing, disconnect fluid supply hose with adapter on the master cylinder. Do not disconnect the adapter before releasing the pressure. 4. If necessary, adjust brake fluid level in the master cylinder. Replace the master cylinder cap on the vehicle. 5. Dispose waste brake fluid in bleeding container safely. Safety Caution: After each service, air pressure must be released via pressure release valve (1).
CTA® started in 1978 with a few of specialty tools and a lot of great ideas. In time, the founders of the company decided to take some of their ideas to the market which allowed CTA to expand from manufacturing about 20 specialty tools to over 1000 tools. Today, from micro-thin "Plastigage" to 600 foot-pound torque wrenches, CTA Manufacturing Corp. offers one of the widest ranges of professional specialty tools in the industry. Whether tuning up your ‘68 Corvette or changing the oil on a John Deere tractor, CTA can provide you with the tools needed to do the job.