Comparison

Chain Drive Winches
Model Single Line
Load Capacity*		 Double Line
Load Capacity*		 Drum
Hub
Dia.		 Gear
Ratio		 Dimensions
(H x W x D)		 Weight
CD3500 1,750 lb / 794 kg 3,500 lb / 1,588 kg 2" 11.5:1 13-9/16" x 10" x 4-1/4" 23-1/2 lb.
CD4000 2,100 lb / 953 kg 4,000 lb / 1,814 kg 4" 25.1:1 13-1/4" x 10-1/4" x 5-1/2" 31-1/2 lb.
CD4500 2,250 lb / 1,021 kg 4,500 lb / 2,041 kg 4" 25.1:1 13-1/4" x 10-1/4" x 5-1/2" 29-1/2 lb.
CD5500 2,750 lb / 1,247 kg 5,500 lb / 2,495 kg 4" 24.4:1 15-1/4" x 10-1/4" x 5-1/2" 33 lb.
CD7000 3,500 lb / 1,588 kg 7,000 lb / 3,175 kg 4" 32.6:1 17-1/8" x 10-1/4" x 5-1/2" 34-1/2 lb.
DLB-Series Brake Winches
Model Rated Capacity (1) Min. Operating
Load Required		 Drum
Hub
Dia.		 Gear
Ratio		 Handle Length Maximum
Mechanical
Advantage		 Cable (2) Strap
DLB350A 350 lb / 159 kg 50 lb / 23 kg 1" 3.2:1 7" 39.8 1/8" x 84' 15'
DLB800A & DLB805A 800 lb / 363 kg 50 lb / 23 kg 1-7/8" 4.4:1 7" 29.9 3/16" x 68' 27'
DLB1200A & DLB1205A 1,200 lb / 544 kg 50 lb / 23 kg 2-1/2" 5.4:1 7" Std. / 9-3/8" Opt. 27.8
/
37.2		 7/32" x 69' 31'
DLB1500A & DLB1505A 1,500 lb / 680 kg 75 lb / 34 kg 2-1/2" 5.4:1 9-3/8" Std. / 12" Opt. 36.8
/
47.1		 1/4" x 60' 31'
DLB1550A 1,500 lb / 680 kg 75 lb / 34 kg 2-1/2" 5.4:1 9-1/2" Quick-Attach 37.3 1/4" x 50' 31'
DLB2500A & DLB2505A 2,500 lb / 1,134 kg 175 lb / 79 kg 2-1/2" 17.3:1 9-3/8" Std. / 12" Opt. 115.3
/
147.6		 5/16" x 34' 21'
B-Series Brake Winches
Model Rated Capacity Min. Operating
Load Required		 Drum
Hub
Dia.		 Gear
Ratio		 Handle
Length		 *MMA *MDC(3)C
B1200B 1,200 lb / 544
kg (1)		 75 lb / 34
kg		 1-1/8" 4:1 12-1/4" 72.9 7/32" x 57'
B1202B 1,200 lb / 544
kg (2)		 75 lb / 34
kg		 2-1/2" 4:1 12-1/4" 36.1 7/32" x 46'
B1500 1,500 lb / 680
kg (1)		 150 lb / 68
kg		 1-1/8" 6:1 12-1/4" 106.9 1/4" x 52'
B1502 1,500 lb / 680
kg (2)		 150 lb / 68
kg		 2-1/2" 6:1 12-1/4" 53.5 1/4" x 45'
B2500 2,500 lb / 1,134
kg (1)		 300 lb / 136
kg		 1-5/16" 12:1 12-1/4" 180.9 5/16" x 51'
B2502 2,500 lb / 1,134
kg (2)		 300 lb / 136
kg		 2-1/2" 12:1 12-1/4" 104.5 5/16" x 45'
B2503 2,500 lb / 1,134
kg (2)		 300 lb / 136
kg		 3-1/8" 12:1 12-1/4" 85.5 5/16" x 40'
B3503 3,500 lb / 1,588
kg (2)		 500 lb / 227
kg		 3-1/8" 18.75:1 12-1/4" 131.3 3/8" x 28'
B4010A 4,000 lb / 1,814
kg (2) (4)		 N/A 2-1/2" 41:1 N/A N/A 9/32" x 54'
(27' per side)
  • MMA - Maximum Mechanical Advantage
  • MDC(3)C - Maximum Drum Capacity (3) Cable
SA-Series Electric Winches
Model (1) Volts / Amps Load Capacity (3) Gear
Ratio		 Cable
(Model No.)		 Pulley
Block
&
Hook		 No Load
Full Reel		 No Load
Empty
Reel		 Full Load
Full
Reel		 Full Load Empty Reel
SA5000DC
&
SA5015DC		 12 Volt DC / 70 1,500 lb / 680 kg 189:1 3/16" x 20'
(6360)		 33 12 8 4
SA5000AC
&
SA5015AC		 120 Volt AC / 8 1,200 lb / 544 kg 189:1 3/16" x 20'
(6360)		 35 16 16 9
SA7000DC
&
SA7015DC		 12 Volt DC / 70 2,200 lb / 998 kg (2) 189:1 3/16" x 50'
(6211)		 X 16 6 4.5 3.5
SA7000AC
&
SA7015AC		 120 Volt AC / 8 1,800 lb / 817 kg (2) 189:1 3/16" x 50'
(6211)		 X 17.5 8 9.5 6
SA9000DC
&
SA9015DC		 12 Volt DC / 70 3,000 lb / 1,361 kg 570:1 7/32" x 25'
(6361)		 11 5 4 2.5
SA9000AC
&
SA9015AC		 120 Volt AC / 8 2,700 lb / 1,225 kg 570:1 7/32" x 25'
(6361)		 18 6 7 3.5
SA12000DC
&
SA12015DC		 12 Volt DC / 70 4,500 lb / 2,041 kg (2) 570:1 7/32" x 50'
(6212)		 X 5 2.5 2 1.5
SA12000AC
&
SA12015AC		 120 Volt AC / 8 4,000 lb / 1,814 kg (2) 570:1 7/32" x 50'
(6212)		 X 9 3 4 2

(1) Model numbers ending in "15" have a built-in remote control with 10 cord (DC models use 6172 remote, AC models use 6349 remote).


(2) Double line operation.


(3) For a full reel of line, adjust capacity according to graph below.



All D-L StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.
TW-Series Electric Winches
Model (1) Volts / Amps Load Capacity (2) Gear
Ratio		 Strap
(Model No.)		 No Load
Full Reel		 No Load
Empty Reel		 Full Load
Full Reel		 Full Load
Empty Reel
TW4000
&
TW4015		 12 Volt DC / 40 1,500 lb / 680 kg 324:1 2" x 20'
(6149)		 22 11 8.2 4.4
TW9000
&
TW9015		 12 Volt DC / 70 3,000 lb / 1,361 kg 570:1 2" x 20'
(6542)		 15 9 6.3 4.3

(1) Model numbers ending in "15" have a built-in remote control with 10 cord (6172 remote).


(2) For a full reel of line, adjust capacity according to graph below.


All D-L StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for handling loads over areas where people could be present.

Pulling Winches
ModelRated
Capacity
(2)		Drum
Hub
Dia.		Gear
Ratio		Handle*MMA*MDCC(3)*MDCS
DLx1200
DLx1200FC		1,200 lb

/

544 kg		7/8"4.4:17"
Black
Plated		567/32"
x
56'		31'
DLx1500
DLx1500FC		1,500 lb

/

680 kg		7/8"4.4:19-1/2"
Black
Plated		741/4"
x
40'		31'
DLx1900
DLx1900FC		1,900 lb

/

862 kg		1-1/8"5.4:19-1/2"
Black
Plated
Offset		739/32"
x
49'		38'
DLx2300
DLx2300FC		2,300 lb

/

1,043 kg		1-1/8"7.2:19-1/2"
Black
Plated
Offset		955/16"
x
39'		38'
DLx2600FC2,600 lb

/

1,179 kg		1-1/8"17.3:1

/

5.4:1		9-1/2"
Quick
Attach		2295/16"
x
39'		38'
DL400400 lb

/

181 kg		5/8"1:17"181/8"
x
87'		19'
DL600A600 lb

/

272 kg		5/8"3.2:17"575/32"
x
61'		16'
DL900A900 lb

/

408 kg		5/8"3.2:17"553/16"
x
40'		16'
DL1100A1,100 lb

/

499 kg		7/8"3.7:17"493/16"
x
79'		29'
DL1300A1,300 lb

/

590 kg		7/8"4.4:17"567/32"
x
56'		31'
DL1402A1,400 lb

/

635 kg		7/8"4.4:19-1/2"741/4"
x
40'		31'
DL1602A1,600 lb

/

726 kg		1-1/8"5.4:19-1/2"
Offset		751/4"
x
58'
45'
DL1602ADD1,600 lb

/

726 kg		1-1/8"5.4:1

/

1:1		9-1/2"
Quick
Attach		751/4"
x
58'		45'
DL1802A1,800 lb

/

817 kg		1-1/8"5.4:19-1/2"
Offset		739/32"
x
58'		38'
DL1800A1,800 lb

/

817 kg		1-1/8"10.3:1

/

5.4:1		9-1/2"
Quick
Attach		1399/32"
x
58'		38'
DL2000A2,000 lb

/

907 kg		1-1/8"12.4:1

/

5.4:1		9-1/2"
Quick
Attach		1689/32"
x
58'		38'
DL2500A2,500 lb

/

1,134 kg		1-1/8"17.3:1

/

5.4:1		9-1/2"
Quick
Attach		2295/16"
x
47'		38'
DL3200A3,200 lb

/

1,452 kg		1-1/8"17.3:1

/

5.4:1		9-1/2"
Quick
Attach		2193/8"
x
30'		25'
DL3500B
(1)		3,500 lb

/

1,588 kg		1-5/16"12:1

/

6:1		9-1/2"
Quick
Attach		1353/8"
x
37'		25'
(4)
  • MMA - Maximum Mechanical Advantage
  • MDCC(3) - Maximum Drum Capacity Cable (3)
  • MDCS - Maximum Drum Capacity Strap

(1) Hand brake standard equipment.


(2) Capacity based on direct line pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum.


(3) Drum capacity based on cable size listed. (Cable not included.) Cable size listed may be too large to be practical for some applications.


(4) Compatible with 3" wide strap only, and a special reel to install the strap is required. Contact us for more information.


NOTES:


  • Optional covers are available for some models.
  • Hand brake can be added to DL1800A, DL2000A, DL2500A, and DL3200A.
  • Larger reel hubs are available for winches that will be used with cable

D-L pulling winches are not recommended for lifting applications. For lifting, use a D-L brake or worm gear winch. D-L winches are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people could be present.

Worm Gear Winches
Model Description Rated
Capacity (1)		 Drum
Hub
Dia.		 Gear
Ratio		 Handle
Length		 *MMA Max
Drum
Capacity
(2)
WG1500 Standard Reel,
Handle Drive		 1,500 lb

/

680 kg		 1.5" 30:1 7" 240 1/4"
x
43'
WG1500LD Standard Reel,
Loop Drive		 1,500 lb

/

680 kg		 1.5" 30:1 - - 1/4"
x
43'
WG1500SR Split Reel,
Handle Drive		 1,500 lb

/

680 kg		 1.5" 30:1 7" 240 1/4"
x
43'
(21.5'
per side)
WG1500SRLD Split Reel,
Loop Drive		 1,500 lb

/

680 kg		 1.5" 30:1 - - 1/4"
x
43'
(21.5'
per side)
WG1500HEX Standard Reel,
Hex Drive		 1,500 lb

/

680 kg		 1.5" 30:1 7" hex - 1/4"
x
43'
WG1500SR HEX Split Reel,
Hex Drive		 1,500 lb

/

680 kg		 1.5" 30:1 7" hex - 1/4"
x
43'
(21.5'
per side)
WG2000 Standard Reel,
Handle Drive		 2,000 lb

/

907 kg		 1.5" 40:1 7" 314 9/32"
x
49'
WG2000LD Standard Reel,
Loop Drive		 2,000 lb

/

907 kg		 1.5" 40:1 - - 9/32"
x
49'
WG2000SR Split Reel,
Handle Drive		 2,000 lb

/

907 kg		 1.5" 40:1 7" 314 9/32"
x
49'
(24.5'
per side)
WG2000SRLD Split Reel,
Loop Drive		 2,000 lb

/

907 kg		 1.5" 40:1 - - 9/32"
x
49'
(24.5'
per side)
WG2000HEX Standard Reel,
Hex Drive		 2,000 lb

/

907 kg		 1.5" 40:1 7" hex - 9/32"
x
49'
WG2000
STRAP		 Strap Reel,
Handle Drive		 2,000 lb

/

907 kg		 1.5" 40:1 7" 314 21'
(2" wide
strap)
WG2000HEX
STRAP		 Strap Reel,
Hex Drive		 2,000 lb

/

907 kg		 1.5" 40:1 7" hex - 21'
(2" wide
strap)
  • MMA - Maximum Mechanical Advantage

(1) Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum.


(2) Drum capacity shown is based on cable size listed. (Cable not included.) Cable size listed may be too large to be practical for some applications.


All D-L worm gear winches are built for multipurpose hauling and lifting operations. They are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people could be present.

Winch Cables
Model Size Capacity
(For winches up to...)		 For Electric
Winch Models
6210 3/16" x 25' 1,800 lb / 817 kg SA5000

SA7000
6211 3/16" x 50' 1,800 lb / 817 kg SA5000

SA7000
6212 7/32" x 50' 2,500 lb / 1,134 kg SA9000

SA12000
6360 3/16" x 20' 1,800 lb / 817 kg SA5000

SA7000
6361 7/32" x 25' 2,500 lb / 1,134 kg SA9000

SA12000
6520 1/4" x 25' 3,500 lb / 1,588 kg N/A
6522 5/16" x 25' 3,500 lb / 1,588 kg N/A
6524 1/4" x 50' 3,500 lb / 1,588 kg N/A

Caution: Safe working loads for cables vary widely, depending on conditions of use. Recommended safe working loads for all applications other than those listed above are:


  • 3/16" - 840 lbs.
  • 7/32" - 1,120 lbs.
  • 1/4" - 1,400 lbs.
  • 5/16" - 1,960 lbs.
Winch Straps
Model No. Size Capacity
(For winches up to...)		 Breaking Strength
6148 2" x 15' / 50mm x 4.6m 1,700 lb / 771 kg 2,600 lb / 1,179 kg
6149 2" x 20' / 50mm x 6.1m 1,700 lb / 771 kg 2,600 lb / 1,179 kg
6248 2" x 15' / 50mm x 4.6m 2,600 lb / 1,179 kg 4,000 lb / 1,814 kg
6249 2" x 20' / 50mm x 6.1m 2,600 lb / 1,179 kg 4,000 lb / 1,814 kg
6250 2" x 25' / 50mm x 7.6 m 2,600 lb / 1,179 kg 4,000 lb / 1,814 kg
6541 2" x 15' / 50mm x 4.6m 3,200 lb / 1,452 kg 4,800 lb / 2,177 kg
6542 2" x 20' / 50mm x 6.1m 3,200 lb / 1,452 kg 4,800 lb / 2,177 kg
6551 2" x 15' / 50mm x 4.6m 3,700 lb / 1,678 kg 6,600 lb / 2,994 kg
6552 2" x 20' / 50mm x 6.1m 3,700 lb / 1,678 kg 6,600 lb / 2,994 kg
6553 2" x 25' / 50mm x 7.6m 3,700 lb / 1,678 kg 6,600 lb / 2,994 kg

All winch straps include mounting hardware.

Hand Winch Handles
Model Type Length Standard With Winch Model Optional For Winch Model
6307 Standard 7" DL600A, DL900A, DL1100A,
DL1300A, WG1500, WG2000		 N/A
6307X Black Plated Standard 7" DLx1200, DLx1200FC DL600A, DL900A, DL1100A,
DL1300A, WG1500, WG2000
6318 Standard 9-1/2" DL1402A DL600A, DL900A, DL1100A,
DL1300A, WG1500, WG2000
6318X Black Plated Standard 9-1/2" DLx1500, DLx1500FC DL600A, DL900A, DL1100A,
DL1300A, DL1402A, WG1500,
WG2000
6319 Offset 9-1/2" DL1602A, DL1802A N/A
6319X Black Plated Offset 9-1/2" DLx1900, DLx1900FC, DLx2300,
DLx2300FC		 DL1602A, DL1802A
6459 Ratchet 8-1/4" N/A DL1602A, DL1802A, DLx1900
6322 Quick-Attach 9-1/2" DL1602ADD, DL1800A, DL2000A,
DL2500A, DL3200A, DL3500B,
DLB1550A		 N/A
6450 Standard 7" DLB350A, DLB800A, DLB1200A N/A
6451 Standard 9-3/8" DLB1500A, DLB2000A, DLB2500A N/A
6452 Optional Add'l Length 12" N/A All DLB-series brake winches
6327 Ratchet 8-1/4" N/A All DLB-series brake winches
6453 Removable 7" N/A All DLB-series brake winches
6454 Removable 9-3/8" N/A All DLB-series brake winches
DLB Camper Handle Camper Handle 7" (12" tube) N/A All DLB-series brake winches
6455 Standard 12-1/4" All B-series brake winches N/A
6323 Ratchet 12" N/A All B-series brake winches
6470 Removable 12" N/A All B-series brake winches
6465 Hex Socket 7" WG1500HEX, WG1500HEX SR,
WG2000HEX,
WG2000HEX Strap		 N/A
Ratchet Repair Kits
Model For Winch Model
6290 DL500, DL600, DL800, DL900
6290A DL600A, DL900A, DL1100A, DL1300A
6291A DL1402A, DL1602A, DL1602ADD, DLx1200,
DLx1200FC, DLx1500, DLx1500FC
6292 DL1602, DL1602DD
6294A DL1800A, DL1802A, DL2000A, DL2102A,
DL2500A, DL3200A, DLx1900, DLx1900FC,
DLx2300, DLx2300FC, DLx2600FC