Product Details
Universal G-200 High Temperature Synthetic Grease by Energy Release®. G-200 Synthetic Grease is a high temperature, low speed (under 1200 RPM) grease. It is recommended for severe applications such as disc brake wheel bearings, Spicer and Rockwell U-joints, backhoe hinge pins, fan hubs and fifth wheels. Designed utilizing the latest technology, this product features premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle, it is manufactured to meet or exceed stringent industry standards.
Specifications
| Thickener: Synthetic |
| Cone Penetration (D-217): 65-295 |
| Dropping Point (D-2262): 550 ºF/287.8 ºC Plus |
| Wheel Bearing Leakage (D-1263): Pass, 0.1gm Loss |
| Water Wheel Bearing (D-1623 Modified): 20% Water, 180 ºF Spindle Pass, 1.5gm Loss |
| Rust Prevention (D-1743): 1,1,1 |
| Copper Corrosion (D-1402): 1a Perfect Pass |
| Oil Separation (D-1742): 1% |
| Oxidation Stability (D-942 @ 100 Hours): 2.0 psi Drop |
| Timken OK Load (D-2509): 80 lbs. Minimum |
| Consistency Grade: NGLI No, 2 |
| Approximate Temperature Range: -5 ºF to 580 ºF |
| Approximate Temperature Range:-20 ºC to 304 ºC |
| Properties of Oil Plus Oil Soluble Additives: Viscosity @ 210 ºF, SUS/CST 188 |
| Properties of Oil Plus Oil Soluble Additives: Viscosity @ 100 ºF, SUS/CST 4400 |
| Viscosity Index: 116 |
| API Gravity @ 60 ºF: 22.8 |
| Flash Point, COC: 580 ºF/304 ºC |
Features
- Heat resistant
- High melting point
- Resistant to oxidation, rust and corrosion
- 550 °F protection
- High EP protection
- High Timken load
- Designed to maximize your vehicle's performance
- Proprietary high tech formula for exceptional quality
- Perfect solution for high performance applications
Severe service requirements such as disc brake wheel bearings, fan hubs, backhoe hinge pins and oven conveyor bearings are examples of applications where Energy Release® G-200 High Temperature Synthetic Grease should be used for excellent results. Mining operations, sand/gravel plants and construction equipment where shock loads are placed on bearings will benefit from the use of Energy Release® G-200. Race drivers report that G-200 significantly outperforms other greases for wheel bearings.
TEST DATA
Spicer Universal Joint Division of Dana Corporation has approved Energy Release® G-200 High Temperature Grease as having met M-2006-J specification for High Temperature Lubricant. G-200 High Temperature Grease meets the U.S. Department of Agriculture requirements for H-2. It can be used as a lubricant, release agent or anti-rust film on equipment and machine parts in locations in which there is no possibility of the lubricant or lubricated part contacting edible products.
- Heat resistant, melting points above 550 ºF
- Resistant to oxidation, rust and corrosion
- Adhesive (clings to moving parts)
- Distinct color for easy identification
- High film strength
- Resists severe loads
- Non-melting
- Water resistant