OPERATING & MAINTENANCE INSTRUCTIONS

OPERATING INSTRUCTIONS

Please review the operating instructions below for use of the Roll-N-Lock® retractable truck bed cover.

UNLOCK
Use the key to unlock your cover.

RELEASE LATCH
With one hand, pull the handle toward the tailgate. With the other hand, rotate the lick clockwise.

OPEN COVER
Allow the cover to slowly roll into the housing.

CLOSE COVER
To close Roll-N-Lock, pull the cover toward the tailgate using the pull strap.

ENGAGE LATCH
Using both hands, pull the cover snugly against the tailgate until you hear the latch mechanism lock into place.

LOCK
The cover is closed, for additional security lock your cover using the key.

MAINTENANCE INSTRUCTIONS

Please review the steps below for maintenance instructions and care of the Roll-N-Lock® retractable truck bed cover.

PROTECT COVER
Apply 303 Aerospace Protectant to the tracks and surface of the cover. This will clean your Roll-N-Lock, protect it from the elements, and ensure smooth operation.

REMOVE LID
To clean the housing, first remove the lid screws, then slide the lid toward the cab and lift.

CHECK FOR A CLOG
Check the housing and drain tubes for leaves and debris.

UNCLOG
Check the housing and drain tubes for leaves and debris.

CHECK DRAINAGE
Check the housing to ensure that it is not filled with water.

UNCLOG
Check the housing to ensure that it is not filled with water.