Driveline Products Information and Features

Spicer Driveshafts for Improved Strength in Your Jeep

Direct-fit bolt-in flange

Dana is providing Jeep owners with an upgrade for their Wrangler JK with this new high-performance Spicer driveshaft.

• Engineered with a smaller diameter - Able to clear the vehicle’s exhaust
• Includes direct-fit bolt-in flange, this driveshaft
• Provides ease of installation and a better off-road experience
• Optimized for 0"- 2" and 2"- 4" lifts on the Jeep JK
• Delivers strength that can exceed even original equipment
• Features tubes that are 50% thicker than original equipment components

Jeep enthusiasts everywhere trust genuine Spicer parts for unparalleled performance in even the toughest conditions. The new genuine Spicer driveshaft, built specifically for the Jeep Wrangler JK, gives drivers an added edge when going off-road.

These Spicer driveshafts are optimized for 0"- 2" and 2"- 4" lifts on the Jeep Wrangler JK

Find out why the Spicer name has been trusted for generations, and why company innovations will continue to inspire off-roaders to push the boundaries for years to come.

A Direct-Fit, Bolt-In Replacement for the Jeep Wrangler JK

This driveshaft features a smaller diameter, which will not interfere with the Jeep Wrangler JK exhaust. In addition, you will enjoy the following advantages:

One-piece flange

• Prevents run-out
• Eliminates need for an adapter
• Bolts to the stock Jeep axle

Optimized for 0" - 2" and a 2" - 4" lift

• Ideal for larger tires
• Offers improved ground clearance

Thicker tube than original equipment part

• 50% thicker than OE shaft
• Delivers added strength

Longer slip yoke for increased travel

• More extension and compression through the tube shaft

Longer slip yoke for increased travel

Spicer 1350 Driveshaft for Ultimate Dana 60TM Equipped Jeep Wrangler JK

Built from high-quality steel to deliver the ruggedness and durability you’re already getting in your Ultimate Dana 60TM axles, 1350 Series driveshafts are engineered for applications that require high horsepower and torque.

• 100% bolt-in solution - Includes all required mounting hardware
• Extra thick tubing - 2" outer diameter / .120" thick wall tube
• Long-slip design - Features 6 inches of travel
• Slip assembly located at the T-case - Minimizes impact damage and contamination

Lighter Weight Driveshaft for Enhanced Driveline Performance

Mustang owners know a thing or two about performance, and that is why they choose the Spicer brand time and again. The Spicer one-piece aluminum driveshaft, engineered specifically for the Ford Mustang, is no exception. It is a driveshaft that is designed for applications that call for increased horsepower, so you can hit the road with confidence.

Spicer one-piece aluminum driveshafts are 21 lbs. lighter than the driveshaft your Mustang came with

High-Performance Driveshafts for Your Ford Mustang

Spicer one-piece aluminum driveshafts offer a number of features that Ford Mustang owners demand, including:

• Reduced overall weight and rotating mass - Delivers improved driving performance.

Provides quicker acceleration

• Bolts directly to the OE Mustang flange - Requires no adapter
• Available in 3.5" and 4" diameters - 4" diameter is designed for higher RPM applications.

Reduces noise, vibration, and harshness (NVH)

• One-piece engineering - Eliminates the need for a center bearing

Spicer one-piece aluminum driveshafts for the Ford Mustang are just one example of the full line of drivetrain components built to meet the needs of high-performance drivers.

The Right Driveshaft for Your Car, Pickup, SUV, and More

Whether you are driving outside the lines or between them, demand the performance that comes from genuine Spicer quality light vehicle OEM driveshafts. Spicer automotive driveshafts and components are available for automotive applications, including passenger cars and light trucks. Because Spicer parts are manufactured to the same standards as original equipment parts, you can count on them to meet or exceed OE performance.

Spicer light vehicle driveshaft assemblies are:

• Specifically designed to meet the needs of your car, truck, or SUV
• Engineered for reduced weight
• Built to minimize noise, vibration, and harshness (NVH)

Original Equipment Quality Driveshafts for Light-Duty Vehicles

Genuine Spicer light duty driveshaft products are manufactured to the same high standards as Original Equipment (OE) parts – because they are OE parts. That means when an automotive driveshaft part is replaced with a genuine Spicer product, it’s being replaced with the original equipment product, ensuring the same performance and reliability you’ve come to expect.

Spicer driveshaft assemblies and steering shafts are engineered for reduced weight and designed to minimize noise, vibration, and harshness (NVH).

High-Performance Universal Joints for Serious Off-Roaders

You expect a lot from your vehicle, and Spicer Life Series™ (SPL™) universal joints deliver. Spicer Life Series u-joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL u-joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series™ (SPL™) can provide.

Longer Life for Your Light-Duty Driveshaft

Cold-forged from high-quality steel, Spicer Life Series™ (SPL™) universal joints deliver the strength and durability that today’s performance vehicles demand.

• Greaseable u-joint or a non-greaseable (pre-lubricated for the life of the part) options - For optimal friction reduction and higher temperature resistance
• Synthetic thrust washer - Eliminates friction and end galling, Prevents the heat that breaks down grease
• Multi-lip seal - Keeps grease in - and contaminants out, Offers maximum retention in a wider range of environments

It all adds up to all-out protection and a longer life for your driveshaft, and it’s why Spicer Life Series™ (SPL™) is the brand people trust.

Spicer Life Series universal joint offer a number of features that help you get the most out of your vehicle—as well as benefits that the competition simply cannot match.

• Journal Cross - Engineered with a solid cold-formed body to ensure better wear and overall strength
• Bearing Cups - Heat-treated for strength; precision-ground and case-hardened for durability
• Thrust Washers - Eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature
• Multi-Lip Seal - Includes a garter spring, seal guard and a needle spacer

Spicer Life Series U-joint Performance Packs

No matter what conditions you throw at your 4WD vehicle, trust non-greaseable Spicer SPL™ u-joints with the triple lip seal for premium performance. And when you need it, Spicer 4WD u-joint performance packs have everything for a complete u-joint change-out - with just one part number to order.

Spicer Life Series™ u-joints are part of a full line of Dana-backed parts designed to unleash the performance in your vehicle.

Driveshaft Service Parts with Genuine Spicer Quality

Engineered for precision and durability, Spicer end yokes help to minimize noise and vibration to keep your driveline running smoothly. In addition, Spicer driveshaft end yokes are:

• Forged from hardened steel
• Heat treated to endure tough conditions
• Engineered a precise fit

Minimize noise, vibration, and harshness and keep your driveline running smoothly.

Spicer end yokes deliver the same quality and reliability you expect from your original equipment parts. That is because they are OE parts, manufactured to the same standards and specifications as the end yokes that were installed in your vehicle in the first place.

Automotive Driveshaft Parts Built to OE Specifications

Designed to provide a precise fit and reliability over the long haul

When you choose genuine Spicer end yokes, you can be assured that you are receiving:

• OE-quality fit, performance, and reliability
• Minimized noise and vibration
• Manufacturing that meets exacting specifications

The bottom line is this: Spicer end yokes deliver the same quality and reliability you expect from your original equipment parts. That’s because they are OE parts - manufactured to the same standards and specifications as the drive shaft yokes that were installed in your vehicle in the first place.

OE-Quality Service Parts for Automotive Driveshafts

Spicer universal joints and end yokes deliver top performance and value for your driveshaft. Count on Spicer bearing strap and U-bolt kits to keep it all together. These strap and U-bolt kits are manufactured to the same high standards you’ve come to expect from the most reliable name in driveshaft parts.

Superior Automotive U-Bolt Kits With Bearing Straps

Strength and security - that’s what you get with Spicer bearing strap and u-bolt kits. With components designed for a precise fit and excellent fatigue resistance they are a dependable replacement for your vehicle’s worn or damaged original parts.

Designed for a precise fit and excellent fatigue resistance.

Spicer automotive u-bolts and bearing straps are the best way to ensure that your u-joints and end yokes stay secure. Like all genuine Spicer parts, Spicer u-bolt kits are engineered to deliver original-equipment quality, as well as the following features:

• Secure fit for reduced vibration and noise
• Premium components that are durable and deliver reliable retention
• Ideal replacement for worn or damaged original parts

OE-Quality Parts for the Ford Mustang, F-150, and More

Genuine Spicer parts for Ford applications

Engineered specifically for Ford 9" applications, including the Mustang, Thunderbird, Bronco, F-150, and more, the Spicer third member is a bolt-in solution that offers two quick-exchange options for circle track, street rod, racing, off-road, and other applications where limits are pushed.

Dana manufactures two construction options to meet your Ford vehicle’s needs.

• Premium-grade aluminum construction - Built for speed on the track
• Nodular iron construction - Ensure excellent handling off-road

Both options offer optimal center section solutions for high-performance applications, as well as the following features:

• Built-in fill plug for easy maintenance
• Billet adjuster nut for increased durability and strength
• High-performance reusable gaskets - Durability with a woven steel core
• Teflon anti-stick coating for clean release

Peak Axle Performance for Racing and Off-Roading

No matter which option is right for your Ford vehicle, you get the confidence that comes from riding on genuine Spicer parts. Get the strength, power, and endurance you need in the most extreme conditions.

OE-Quality Gear Sets for Cars, Trucks, and SUVs

All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. Theyre built to the latest designs, which include:

• Premium heat treatment processes
• Optimal tooth profiles
• High-grade steel for maximum durability

When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years. Spicer gearing is:

• Manufactured with a special grade of steel
• Machined and heat-treated to precision
• Engineered to ensure matched sets and mating of the gears

Proven Processes Make the Difference for Spicer Ring and Pinion Gearing

Spicer ring and pinion gearing consistently offers advantages over the knock-offs. Thats because Spicer parts start from quality materials, and then they are subjected to computer-controlled processes and rigorous testing.

• Superior Metallurgy: Ensures more consistent, higher quality product
• Hobbed and Shaved Gearing: Provides optimal mating to minimize stress and maximize life
• Precision Heat-treating and Shot-peening: Delivers consistent quality, enhanced life by reducing residual stress and exceptional durability

Remember: Non-genuine replacement parts are usually not manufactured to the same standards, which can cost you more in the long run. When you purchase gearing with the Spicer name, you can rest assured that you are getting quality product that’s engineered to keep your vehicle on the road.

Strength and Durability for Cars, Trucks, and SUVs

For years, Spicer differential carrier case assemblies have been an effective repair solution for automotive applications, including autos, pickup trucks, SUVs, and more. In addition, we are always making improvements to our diff cases to ensure that we are providing original equipment quality for individuals looking to save money and increase performance.

Spicer differential carrier cases are available for open and limited slip differentials.

• A complete loaded assembly
• Featuring near-net formed spider gears - Engineered to be stronger than ever
• Built from a stronger grade of steel than the nearest competitors
• Available for open and limited slip differentials
• Designed to meet OE standards set by Dana, the global leader in drivetrain components

Spicer Diff Case Assemblies: Made in the USA for Automotive Applications

Get the strength and durability you need in your light-duty applications with Spicer diff case assemblies, part of a complete line of high-performance parts that offer a level of quality that earns the legendary Spicer name. Browse Spicer performance parts today and discover the difference that Spicer parts can make for you.

Better Traction Off-Road or On the Trail

For a distinct advantage off-road or on the track, count on Spicer performance spools for the ultimate in traction. Spicer spools keep the left and right axles spinning together, so you get constant traction and peak performance that lasts.

Spicer performance spools offer tremendous advantages for racing enthusiasts and hardcore off-roaders, providing features and benefits that standard differentials cannot offer. Spicer performance spools replace the need for a differential case, thus eliminating failures from high-torque, high-impact situations.

Spicer Full Spools or Mini Spools: Two Options for a Competitive Edge

Eliminate gear failure caused by case deflection or differential gear failure with Spicer full spools. By replacing the entire differential carrier, Spicer full spools offer a competitive edge off-road or on the racetrack.

When you purchase Spicer full spools, you are getting parts that are:

• Made from heat-treated chromoly 4130 forged steel - Providing optimal strength
• Heat treated and tested for optimal metallurgy - Ensuring ideal hardness for performance applications
• Available in lightweight versions - Helping provide a lighter rotating mass
• Available for all makes

Designed to replace the spider gears inside the differential case, Spicer mini spools are a fast, effective way to get full lock-up on the dirt track or off-road. Discover the difference that comes from dual heat-treated high-strength 9310 forged steel, and check out the downloadable sheet on the left to find the part number that’s right for your vehicle.

Keep your axles spinning together for constant traction and peak performance

Spicer spools are not recommended for everyday street driving, but they offer incredible benefits in performance applications.

Spicer Performance Spools: Part of a Full Line of High-Performance Products

Spicer parts can deliver innovations that meet the latest performance demands. That commitment to the specialty market is what has made the Spicer brand the most trusted name in the business.

Engineered for Off-Road. Tougher Than Terrain

Your differential is engineered from some pretty intricate components, and nothing keeps everything protected like genuine Spicer differential covers. Whether your vehicle is built for speed or heading off-road, Spicer diff covers are there, keeping your gearing safe and protecting your investment. Spicer also offers a selection of genuine standard OE differential covers and aluminum finned differential covers.

NEW! Nodular Iron Performance Diff Cover. Off-Road Ready

For non-Dana applications – includes Spicer plate

For full-performance differential covers that are engineered with the serious off-roader in mind, get the same name you trust for all your drivetrain products - genuine Spicer. Manufactured from high-strength nodular iron, Spicer performance diff covers are built to meet the demands of any environment.

Don’t trust a knock-off to protect your intricate differential parts. Count on the legendary Spicer brand.

For Dana applications – includes Dana plate

• Coverage for Dana axle applications
• Coverage for Ford 9.75" and 8.8" axle applications
• Designed and engineered for performance applications
• Manufactured from high-strength, nodular iron
• Built with ribbing to protect differential components from off-road hazards
• Diff Cover
• For Dana applications – includes Dana plate
• Ensures greater housing rigidity
• Raised fill plug for increased fluid capacity on high pinion angles
• Includes hardware and drain plug
• Includes Spicer differential cover performance gaskets

Axle Products Engineered for Performance

Genuine Spicer pinion yokes deliver maximum strength, premium durability, and unparalleled protection against corrosion—exactly what you expect from the most trusted name in drivetrain components.

Each genuine Spicer performance pinion yoke is:

• Machined to an exact tolerance - Ensuring a perfect fit for your vehicle
• Finished with black oxide coating - Providing optimal rust protection
• Forged from high-quality steel
• Delivering maximum strength

Pinion Yokes: Genuine Spicer Performance Parts

Spicer performance pinion yokes are available for most popular axle models. They are part of the full line of performance parts manufactured to meet the demands of serious enthusiasts - and deliver the level of quality that earns the backing of Dana.

A Complete Diff Case Rebuild for Automotive Axles

Get everything you need to rebuild your differential case with genuine Spicer inner gear kits. Forged to ensure greater strength and increased durability, this is only inner gear kit that is engineered to meet the standards of Dana, the global leader in drivetrain components.

Near-Net Forged for Longer Life in Dana Axles

Spicer inner gear kits include the parts you need to make your repair easy:

• Diff gears
• Side gears
• Hardware
• Thrust washers
• Cross shaft

Because these parts are near-net forged to original equipment specifications, you can be assured that you get maximum durability.

An easy repair solution designed specifically for high-performance applications.

Each component of a Spicer inner gear kit is engineered to exact Dana specifications. In addition, you can get performance without the stress risers that come from cutting gears. Because Spicer inner gear kits offer the following features, you can be assured of optimum quality:

• Phosphate coating on cross shaft
• Statistically controlled heat treating
• Product analysis
• Testing to meet aftermarket specifications for the following conditions: Case depth, Core hardness, Microstructure, Materials, Coatings

Spicer inner gear kits are one of the many repair solutions designed specifically for high-performance applications. Wherever limits are pushed, on the track or on the trail, Spicer parts are there.

Axle Components for Automotive Applications

Genuine Spicer Axle Kits include all the latest production upgrades, so the parts you’re installing are as good - or better - than the parts that originally came with your vehicle.

• Save Money: Buying components separately can be costly and cumbersome.
• Save Downtime: Be ready to perform a repair or overhaul as you need it.
• Save Aggravation: Have all the parts you need - right where you need them.

Spicer Axle Overhaul Kits

The most comprehensive kit comes complete with everything you need for a thorough and lasting repair.

• Highest quality mix of bearings, cups, and cones, each precisely selected for maximum performance in every position and application.
• Premium oil seals for your best protection against nagging leaks and damaging contamination.
• All the small parts to do the job right, including sealant, snap rings, gaskets, shims, and more.
• Production upgrades that keep genuine Spicer parts as good or better than the OE parts they replace.

Spicer Axle Bearing Kits

Remember - not all bearings are created equal. Choose Danas Spicer axle bearing kits for just the right repair.

Each kit comes complete with exactly the right combination of parts you need to get your axle back in shape and on the road, including:

• Highest quality mix of bearings, cups, and cones for performance you can count on
• Premium oil seals to keep lube in and dust and road grime out
• Handy RTV compound to seal the repair

Take control of your 4-wheel drive engagement with a high-performance Spicer 4WD vacuum actuator. This vacuum-operated diaphragm:

• Ensures that your 4WD is fully engaged
• Helps you avoid a commonly misdiagnosed repair

The 4WD Vacuum Activator. OE Durability. Made in the USA

If you are experiencing less responsiveness in your 4 wheel drive axle, there is a good chance that your rubber diaphragm is cracking or breaking, impeding the operation of your four wheel drive truck or vehicle. By replacing the 4WD vacuum actuator in your pickup truck, Jeep or SUV, you can help remedy this. Spicer 4WD vacuum actuator kits come with everything you need to make a complete repair, including all the gaskets and seals that prevent leaks and keep the elements out.

Enjoy easy installation, as well as solid performance even in harsh weather conditions.

Spicer 4WD vacuum actuators are part of the complete line of Spicer high-performance parts. Engineered to deliver on or off the road, these are the parts that serious enthusiasts demand.

Easy Repair Solutions When Performance Matters

Tired of using paper differential gaskets? With genuine Spicer high-performance gaskets, you have a quick and easy solution. These gaskets are easily installed and instantly sealed, making replacement a snap when you are in the field. And once they’re installed, Spicer high-performance gaskets deliver maximum durability.

Made in the USA, Spicer high-performance gaskets feature:

• Anti-stick coating on the outside
• Non-asbestos facing
• Woven steel core for enhanced durability

Enjoy tremendous advantages with an easy repair solution in the field.

Spicer high-performance gaskets are designed to seal minor surface irregularities. In addition, these gaskets are:

• Manufactured with proprietary high-density performance material - Provides no re-torque design with maximum compression and sealing. Maintains the initial load without the need for elastomer beads, which can rupture and require re-torque
• Built to withstand extreme temperatures - Engineered specifically for performance settings
• Reusable - Coated with Teflon. Offers cleaner release during replacement
• Built with a mechanically and chemically bonded woven steel core - Delivers stiffness for easy in-field repairs and radial strength
• Made to adhere without messy RTV sealant - Saves on install time by eliminating the time needed for RTV to cure

Unleash the Performance in Your Vehicle with Spicer Parts

Spicer high-performance gaskets are part of a full line of quick and easy repair solutions and service parts for performance enthusiasts everywhere.