Vehicle Fitment
This part is universal
Product Details
Universal 110 V Heated Tire Groover (ALL10260) by AllStar Performance®. Allstar Heated Tire Groover. Groovers add extra traction in minutes. Tapered, razor sharp blade grooves fast and easy. To operate, insert a blade into groover, set blade height with a tire depth gauge and set the power level. Trigger-less activation by placing the cutting edge against the tire surface and apply pressure to activate rocker switch, built into head, creating instant heat.
Specifications
| Voltage: 110V |
Includes
- Flat Blades: 4/32", 6/32", 8/32" and 10/32"
Features
- Precise manufacturing and high-grade materials
- Exceptional performance at a competitive price
- Stringently tested with the highest quality standards
- Designed to help to get your job done right
- Manufactured utilizing the highest quality materials
- Built to provide exceptional levels of durability
BLADE INSERTION – With blade clamp screws loosened by one half turn, slide blade cradles (blocks with blade stops) together or apart to roughly match the blade to be inserted. Squeeze blade to align blade legs with the slots of the cradles. Push blade legs down into slots and then slide blade legs under blade clamps. Adjust blade to desired cutting depth. Slide blade and cradle assembly left or right to center blade. Lightly tighten blade clamp screws to lock blade in place. Over tightening will shorten life of the blade cradle and clamp.
BLADES – A sharp blade will allow you to cut easier, faster, and with less force. A dull or damaged blade should be replaced. Avoid smoke because this indicates excessive heat which will shorten blade life.
POWER LEVELS – Always cut with the lowest possible power setting. This groover has eight power options; four within the high and four with the low range. Rubber durometer, blade size, depth of cut and speed of cut are all variables that will affect your power level selection. Start with a lower power setting and adjust higher if necessary.
GROOVING – No warm up time is needed. Place the cutting edge of the blade against the tire. Angle the tool so the blade will cut the rubber. The groover will automatically activate when the operator applies cutting pressure. As the blade cuts into the rubber, allow the stabilizer slide pads to flatten against the tire. This will stabilize the tool at the proper cutting angle and enable the opera - tor to cut at a consistent depth.
CLEANING AND MAINTENANCE – For optimum performance, the head should be cleaned daily or more often under heavy use. Remove the blade and with the clamping screws loose, spray the head assembly with a solvent such as carburetor or brake clean. Use compressed air to dry and remove any debris from head.
AllStar Performance® The key to success in a car building project is access to high quality, reasonably priced parts that get the job done right. Each AllStar part is the result of dedication to research and development. Once a need is established, parts are designed and manufactured by talented craftsmen, many of whom are racers and hot rodders themselves. Many AllStar Performance parts are one-of-a-kind; you won't find them anywhere else.
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!