APG® IA03NBI6B - 6" ST Drop Style Cab Length Black Rectangular Nerf Bars

Clean look and very sturdy.

So I bought some "nerf" bars from another company which was fine I just didn't like the look of them. Made my truck look like a boat with outriggers or something anyway that's my opinion. So, I got these and I really do like them. Now I am not a pro as these are the only two sets I've put on but with a little experience now here is what I did to save the headaches of the first install. I invested in some wire brushes and spray lube for my drill and cleaned out all the attachment points under my truck to get the crud and rust out which is Bonus #1. Bonus #2 which I ended up doing was putting the brackets on the truck first... with the T-Bolts less than loose... and let the brackets hang loosely. Then set the assembled bar on top and let the T-Bolts slide into the openings then tighten the whole thing getting things snug first then tight. I did put the brackets on the passenger side at the outset but could not slide the bar onto it because there was no room but again, this was my truck, my experience. I have an access cab which may limit space to slide it onto the fully assembled brackets I don't know. I could have assembled the whole thing then try to hold it up to the truck while laying on the ground using my third arm to get the bolts started but if you're alone use your own best judgement. Anyway, read the instructions and take in the photos and take your time these are pretty cut and dried to install and if you have to tweak it a bit like I did it's still going to be ok. I'm old, I'm retired, I did it, you can too. Glad I bought them and we'll see how they stand up to Kansas and Kansas winters.

These look good and work well, very comfortable to get in my truck, wasn't too bad to put together and install, good customer service too

Received on time with no damage. Not the first set of boards I've installed, but first on my new truck. So knowing the amount of screws involved, I did an assembly line set up for the drop steps. Then I just followed the straight forward directions. It's been a week since installation. No creaking, and solid feel so far. Nice finish at a great price. The design is perfect for my Ram Rebel.

The Nerf bars were a great addition to my truck. It is much easier to enter and exit the truck now plus the protection that they provide. The installation was very easy and straight forward. Great Product!!

These are a great replacement for my stock oval steps, Much higher and tighter to the rocker panels. it's been about 2 months and they are holding up strong.

I thought it was well made but it has too many pieces, which leads to too many adjustments to get it right.

In the end, I’m pretty happy with the product as a whole, but boy, whoever designed these could’ve made the T bolts go away in Leu of the way, the steps actually attached via the gold inserts because boy, those things were a pain to get to line up and stay in place with the cheap cheesy washer. Do yourself a favor and put them on the bars themselves with the brackets attached and just attach the brackets to then truck body with them attached to the bar and extra pair of hands definitely helps but I’m glad I have long legs and buckets.

Installed these on my 2021 Bronco Sport. They're solid, look good on it, and provide a useful step up. For the price, they're a pretty good deal.

Solid and stylish!