Baer® 4302339FR - SS4 Plus Drilled and Slotted Rear Brake System

Benefits:

• Drilled holes and Slots create an escape route for debris, dust, gases, and water
• Slots clean and de-glaze pad surface for optimum pad coefficient of friction
• Drilled rotors improve the appearance of your wheels and provide reduced rotor weight
• 2-Piece rotors offer great weight savings and provide rapid heat dissipation compared to 1-piece rotors
• Vented type of rotors offer much faster heat dissipation
• Multi-piston calipers provide clamping force on both sides of the rotor at the same time and uniformly transfer braking force to the brake pads
• Caliper pistons are hollow to save weight
• Aluminum caliper body allows for exceptional light weight (up to 40% of weight savings) and ensures superior corrosion resistance
• Caliper heat-resistant coating prevent cracking and fading
• Fixed calipers create friction from the brake pads on both sides of the rotor at minimum time interval

Baer SS4 Plus brake kits offer virtually all the features and benefits of their Extreme Plus and Pro Plus kits in a smaller 13-inch rotor size. Designed for aggressive street driving, this kit starts with 4-piston rear calipers - an upgrade from the typical two pistons found on most modern vehicles. Baer has tested and refined the SS4+ calipers relentlessly in order to achieve the perfect balance of performance and control. Engineers determined radially mounted calipers maintain greater stiffness under load, and SS4+ ones are built that way to ensure pads stay in proper alignment with the rotor. Perfectly balanced performance means using superior materials to ensure components continue to work as well tomorrow as they do today by staying free from corrosion. Stainless steel is used to craft the caliper pistons, caliper attachment brackets, and vibration dampening springs. Pistons within each caliper are staggered in size to minimize pad taper and uneven pad wear, so you'll get more usable brake life out of your pads as well. Finally, aluminum caliper housings feature a durable powder coat finish that's extremely resistant to heat, grime, and rock chips.

Baer matches the high level of caliper performance with ceramic brake pads that come pre-loaded inside each caliper. Used in championship racing where 200 mile-per-hour speeds quickly generate blistering heat, ceramic brake pads offer the natural ability to stay cool under the most severe conditions. When ceramic brake pads are combined with the slotted and perforated design of the rotors, heat buildup is reduced so extensively that brake fade rarely occurs - because brake fluid stays cool enough not to reach boiling temperature. Ceramic brake pads are far quieter due to their higher resonant frequency undetectable by human ears, so squealing is not an issue. And finally, ceramic compounds last longer and produce finer, less obtrusive dust that does not stick to most wheel surfaces. Ceramic brake pads also feature racing-grade backing plates that more effectively prevent heat buildup. You don't need a high-performance vehicle to enjoy the benefits these brake kits offer, and you might find your new car dealer charging a similar price while giving you less. We invite you to contact our knowledgeable specialists seven days a week for help with any questions you have on Baer brake kits at 800-505-3274.