BedSlide® BSA-TOY71 - No-Drill Factory Mount Kit

The big difference helps a lot my replacement sealed roller bearing.

This is a great product for the Gladiator. Some minor adjustments and modifications will have to be made. The bolts to mount the frame are hex and are too tall. We used round button Allen head bolts and worked fine. The bed is not wide enough for the side bins They will extend over in the bed just a bit if you remount them - but caution - we cut 6" x 6" plates and re-drilled so they would work. I have 1/2" on each side of the Bin Boxes to pass. Mini Bin Boxes will not work. If you have any mechanical ability at all you can make this work. The only reason I gave it a "Good" review is because of the modifications we had to make. BEDSLIDE has been notified and is aware of the problem - the Mini Boxes will not work.

This is a great product. Some adjustments must be made for the Jeep Gladiator. Bolts for main frame to mount bed are hex bolts. You will have to install with round heat socket screws. You will also have to make plates to remount the boxes as they will not pass your bed sides if you mount like instructions. I have informed BEDSLIDE and they have passed on to their Engineering Dept. Do not pass this up if you have any mechanical ability at all. This is a great product.

Like the slide with one exception when you pull it all the way out it raises up at the end instead of staying flat.

The product came well packaged and undamaged. It was heavier than I expected so it took some ingenuity to get it onto the truck but installation was pretty straight forward. The riv nuts are a great device for the installation! They made the install go very smoothly and I was able to work from inside the bed. I have had another bed slide in the past and trying to work above and below the bed at the same time is virtually impossible. The bedslide moves very smooth and clean. The decking seems okay and it's durability is yet to be determined with moisture since it's a pressed material. The rails are of decent quality and seem to be suitable for normal use. Overall, I'm pretty pleased with the slide and hope to get many years of usage from it.

Excellent install quick and easy. A little too heavy to solo lift into truck bed. Definitely would recommend to a friend.

The product it just like a my truck bed coated and well made. Easy to install and you have no idea how nice it is to be able to get equipment or materials out of the front of the bed until you use it. Like I said very well made.