Name: Brembo® 09.B969.1X - Premium Xtra 1-Piece Rear Brake Rotor
Brand: Brembo
SKU: mpn5303468674
Price: 136.30 USD
Availability: InStock
Rating: 4.8 (6 reviews)

Vehicle Fitment

Audi

Porsche

Specifications

Rotor Construction	1-Piece
Rotor Type	Vented
Rotor Diameter	330mm (12.99'')
Rotor Height	36mm (1.42'')
Nominal Thickness	22mm (0.87'')
Minimum Thickness	20.5mm (0.81'')
Brake Surface Finish	Coated
Construction	Full Cast
Grade Type	Performance
Material	High Carbon Cast Iron
Screws Included	Yes
Surface Type	X Drilled

Features

Drilled holes provide better venting of heat, brake dust, gasses, and they effectively remove water off rotor surfaces
Rotors cool 20% faster due to center vent areas that contain spaced pillars instead of straight slats
Rotors are crafted from iron with high carbon content which achieves reduced vibration and squealing noise
Rotors provide a higher grip coefficient and slower wear rate
Rotors are more resistant to heating up and becoming warped
Lower operating temperatures greatly reduce fade that results from brake fluid reaching boiling temperature in the lines
Brake pad life is typically extended by 20% due to these rotors maintaining a smoother, more even surface
Rotors are coated for corrosion protection on all non-contact areas

Product Details

Premium Xtra Vented 1-Piece Rear Brake Rotor (09.B969.1X) by Brembo®. Brembo brake rotors utilize a number of cutting edge technologies that improve performance, durability, resistance to environmental effects, and comfort. With Brembo line of UV rotors, you are getting a perfectly balanced brake disc made by professionals who understand your driving needs.

Brembo’s Xtra line of brake rotors combine drilled rotor design for the ultimate street performance and UV coating to give improved braking while looking good. Brembo has put together a line of rotors designed to fit different vehicle classes, utilizing different rotor geometry to achieve optimal performance for each type of vehicle.

Heavy rain can have a negative effect on your ability to effectively brake as the water gets between the pad and the rotor. With Xtra drilled rotors, Brembo has solved that problem and increased the grip even under wet conditions. Xtra rotors are designed to bite and bite hard.

Drilling holes in the braking surface allows for significant improvement in ventilation of gasses that form during braking. Furthermore, the holes allow the rotor to dissipate heat faster and reduce the chances of rotor damage under heavy use.

The addition of holes to the braking surface also helps with cleaning the surface of brake pads. As the car brakes, the top thin layer of the pad is removed by the rotor producing a “scraping effect” as it runs over the holes. This effectively eliminates any accumulated deposits of potentially dangerous materials that form on the brake pad itself.

UV coating technology greatly reduces the negative effects of the environment on rotors. Brembo Xtra line of brake discs features UV protection on all surfaces, including the braking surface. You can count on better corrosion resistance, a clean aesthetic, and overall reliable performance.

Brembo® - Catalog Brembo® - Brake Products Features Brembo® - Frequently Asked Questions Information Brembo® - Bedding Guide Brembo Authorized Dealer Product lines FAQ About us

Brand:

Brembo

Part Number:

09.B969.1X

Alternate MPN:

09B9691X

OE Numbers:

4H0615601H, 95B615601A, 95B615601G, 8W0615601K, 4H0615601Q, 80A615601C, 8W0615601E, 80A615601A, L80D615601, 4H0615601D, 4H0615601K, 80D615601, 95B615601F

Warranty

"BREMBO S.p.A. ("Manufacturer") warrants to the original user that this Product complies with Manufacturer's published specifications and is free from manufacturing defects in materials and workmanship (a "Covered Defect"). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law. If the Product is found to have a Covered Defect, the Product will be, in the Manufacturer's sole judgment, either repaired or replaced by a new or rebuilt Product.

THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY MADE WITH REGARD TO THIS PRODUCT AND IS MADE IN LIEU OF ALL OTHER WARRANTIES WHETHER ORAL OR WRITTEN. ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. MANUFACTURER SHALL HAVE NO LIABILITY FOR INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER AND IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY DAMAGES IN EXCESS OF CLAIMANT'S PURCHASE PRICE FOR THE PRODUCT.

For products sold in the U.S., some states do not allow the exclusion or limitation of incidental or consequential damages, so one or more of the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other legal rights which vary from state to state.

This Limited Warranty does not apply to: any damage to the Product caused in whole or in part by abuse, accident, fire, chemical corrosion, use for other than its intended purposes, unlawful use, use in a model for which it was not designed, faulty installation, installation contrary to the Manufacturer's published instructions, or failure to maintain the Product in accordance with the Manufacturer's published instructions - claims of comfort, noise, vibration or harsh riding characteristics.

This Limited Warranty sets forth the sole liability of Manufacturer hereunder, and it may not be changed by any dealer, distributor or other person. The Product has been designed and manufactured for the specific model and application indicated in Brembo HP brake upgrades catalogue and/or at Brembo Product's distributors. The Product shall be used in compliance with laws and rules in effect in the states and/or countries in which the vehicle in which the Product is installed will be operated, including but not limited to compliance with the applicable traffic rules and obtaining any prior necessary authorization/homologation, approval or license in such states and/or countries.

The Manufacturer is relieved of any and all damages, claims and liabilities in case the use of the Product does not comply with such applicable laws and regulations. This Limited Warranty shall be governed, construed and interpreted in accordance with Italian Law".

Reviews

(6)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

1-6 of 6 Reviews

Sort by

5 of 5

Replacement Rotor

I commend TRUCKiD on replacing the driver's side rotor properly, after they sent two passenger side rear rotors. Easy installation, no hassle with the exchange. I saved about $3K on installation charges vs the dealership. Very pleased!

Brembo® 09.D934.11 - UV Coated Series Drilled Vented Rear Driver Side Brake Rotor

Posted by Jerry (Salem, OR) / August 14, 20252014 Porsche 911 Series

5 of 5

Great Fit

These rotors fit perfectly and are a lot cheaper than the dealer. So glad I found this site.

Brembo® 09.A198.21 - UV Coated Series Vented Rear Brake Rotor

Posted by Brad (Blaine, WA) / May 06, 20242018 Subaru BRZ

5 of 5

High Quality

The look and performance of these rotors were worth the marginal additional cost. I can't rate the uv coating yet, but hope it follows the performance.

Posted by James (Oakdale, NY) / February 20, 20171999 Ford Expedition

5 of 5

Excellent Product

Super easy to install and look better than the original rotor.

Posted by Sam (Chicago, IL) / January 03, 20172007 Toyota FJ Cruiser

5 of 5

Super Easy Installation.

High quality rotor and better than the OEM.

Posted by Sam (Chicago, IL) / January 03, 20172007 Toyota FJ Cruiser

4 of 5

Brembo Brake Disc

I have had my new Brembo rotors on the vehicle for more than a month. Coupled with my new pads, I've noticed a much improved braking function. The primary reason for replacement was to correct rotor warp and the resulting steering wheel shake. Well, mission accomplished.

Posted by Robert G (Bothell, WA) / November 13, 20131994 BMW 5-Series

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!