BumperShellz® DT3013 - ArmorShellz Rear Bumper Side Covers

12 reviews|Item # mpn5191691365
Authorized Dealer
$175.46
OUT OF STOCK - Unavailable until further notice
See similar products
Have a Question? Ask a Specialist
888-903-4343Live Chat

Vehicle Fitment

Toyota

Specifications

Product Name
Bumper Side Covers
Material
ABS and TPO plastics
Quantity
1 pair
Position
Rear
Additional Information
With Parking sensor cut-outs
Installation Type
3M tape

Includes

  • Rear driver side bumper cover
  • Rear passenger side rear bumper cover
  • Pre-installed acrylic foam tape
  • Installation instructions

Features

  • Pre-Installed Acrylic foam tape
  • UV/Scratch Resistant Clear Coat
  • Restyle chrome or painted bumpers
  • Protect bumpers from minor damage/abrasions
  • Cover existing minor dings or rust
  • Install easily over existing original equipment bumper
  • Limited Lifetime Warranty
  • Fabricated on state-of-the-art equipment
  • Thoroughly Tested to live up to the toughest conditions
  • Expertly Crafted using premium-grade materials

Product Details

ArmorShellz Rear Bumper Side Covers (DT3013) by BumperShellz®. Clearance holes are pre-cut in BumperShellz to fit around sensor trim when "with Reverse Sensor" is selected as configuration. Convert the look of your truck in minutes with these high quality covers. Restyle your original equipment bumper for an amazing new look at a fraction of the cost of replacement! Exclusive new product to restyle and protect original equipment bumpers. Made from high-impact resistant ABS plastic. BumperShellz not only look great, they also provide additional protection from minor dings, abrasions, and corrosion from snow/salt, and even cover minor damage, saving you money! They install easily over your original equipment chrome/painted bumpers, providing a much lower cost and time consuming option than aftermarket bumpers.

Cover minor dents/scratches/rust
Economical and attractive alternative to replacement
Refreshes the look of your truck

Protect your bumper against:
Scratches/dings
Road debris impingement
Rust
Boring styling

Shellz fit over existing bumper
No modifications necessary
Easy DIY installation with high strength acrylic foam tape
Great new look at a fraction of the cost of aftermarket bumpers

BumperShellz® - 3M TapeBumperShellz® - FAQBumperShellz® - InformationMade In USABumperShellz Authorized Dealer
Brand:
BumperShellz
Part Number:
DT3013
UPC:
817331022768

Reviews

(12)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-10 of 12 Reviews
4 of 5
Bumper Cover
Install was easy, looks good, but a little pricey.
BumperShellz® BT1011 - ToughShellz Rear Bumper Cover Set
Posted by Stephen (Mamou, LA) / December 26, 20192005 Toyota Tacoma
4 of 5
Look Great, No Instructions
Once I figured out how I could install the covers they look great. Paint color is slightly off from stock but so close, it's not an issue for me. Installation instructions would really help. The hard part was getting the plastic step cover on the top of the bumper to come loose so the new cover can be tucked under the step cover. I was able to get a screw driver in between the top metal of the bumper and the plastic top cover. I positioned myself underneath the truck to pry loose the bumper top cover. Once that was loose enough I was able to slid the bumper cover into place with some prying and muscle. The cover are supposed to be secured with double sided tape. Without totally removing the top bumper cover there is no way to use the tape. I put them on this way and Im not using the tape and trust me they arent gonna fall off, they fit very tight just hold in with the overlap from the top bumper cover. I've been through automatic car washes and they seem to be staying in place very well. So, great inexpensive solution to an annoying problem, but if your not handy might be a challenge to install.
BumperShellz® BF3010 - Gloss White Rear Bumper Cover Set
Posted by Michael (Vermilion, OH) / October 17, 20192012 Ford F-150
4 of 5
Wrong Item
Seem like a great product, but they sent me ones with holes for sensors and I specifically ordered no sensors, I opened box and disposed of it before I noticed so I had to install them anyway now they are a great product but I have holes in them. As much as I order from TRUCKiD you think they would get it right.
BumperShellz® BG3001 - Gloss Black Rear Bumper Cover Set
Posted by David (Boynton Beach, FL) / June 07, 20192008 GMC Sierra 1500
4 of 5
Good Product.
Overall the product looks really good and I’m happy with the purchase. I found a lot of difficulty prying the trim up to tuck the bumper cover underneath. The 3M adhesive had a hard time sticking to my bumper but I think enough stuck to keep them flat. I think for what they are they’re extremely expensive, however, they’re still more affordable than a vinyl wrap or paint job. They match my paint well and have yet to cause any issues with me. Overall I’m happy with my purchase and would recommend them to others looking for a cover ups.
BumperShellz® BK1010 - Gloss White Rear Bumper Cover Set
Posted by Brenden (Mansfield, TX) / March 05, 20192016 Chevy Silverado 1500
4 of 5
BumperShellz
I purchased the front BumperShellz in gloss black for a 2018 Siverado and liked it so much I then purchased the rear. The rear included very detailed instructions but the front set had absolutely no instructions. For installing the rear, the flexible spatula sold with Bondo body filler works best. Installing the front required removing a lot of body trim bolts and took way longer than the 15 minutes that was advertised. Overall a very good product.
Posted by Brian (Spicewood, TX) / August 31, 20182014 Chevy Silverado 1500
4 of 5
Fits Perfect
Covers all unsightly digs and dings on my chrome bumper. Fits nice and tight. I would have preferred a textured flat black surface but had to paint myself. $50.00 for flat black paint?
Posted by L. (Waterloo, IL) / July 26, 20182011 Ram 3500
2 of 5
Not the Best Quality or Fit
Some cuts were uneven and/or white was showing through them on edges. Fog light cut out area not seamless with bumper cut out. There was overhang mostly on bottom which could gather water causing decreased visibility and potential electrical issues. At this price, it should look more machine cut and fit perfectly. Stinks because they are the only company that does this type of bumper add on - maybe that explains their lack of effort for perfection - so my advice to them would be to own it and get the quality/fit down without the flaws.
Posted by Joshua (Midlothian, VA) / November 03, 20182015 Ford F-150
4 of 5
Good
Great product, overpriced but good.
Posted by Jared (Dickson, TN) / August 30, 20182015 Ford F-150
4 of 5
Good
Great product, extremely overpriced for what it is but works great.
Posted by Jared (Dickson, TN) / August 30, 2018
4 of 5
Awesome
Completely changed the look of my truck. I love it! It was a little harder to install than expected, but overall wasn’t that bad.
Posted by Joshua (Park Falls, WI) / August 24, 20182014 Chevy Silverado 1500

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!