Gates® - HVAC Heater Molded Hose

12 reviews|Item # mpn122778883
Vehicle SpecificCannot Confirm Fitment
  • We need more information
Select Vehicle
Confirm Fitment
Notes:
  • Protective Sleeve Required
  • Cut to Fit
  • Do not use for fuel or oil transfer applications
Replaces Original (OE) Part #:1786
Authorized Dealer
$14.15
In Stock (22)
Have a Question? Ask a Specialist
888-903-4343Live Chat

Vehicle Fitment

Chevy
Mitsubishi
Suzuki

Specifications

Centerline Length (in)
15.6"
Inside Diameter 1 (in)
0.25"
Number of Branches
0

Features

  • Similar to OEM specifications
  • Has all the quality features of Gates Molded Coolant Hose
  • Engineered to resist electrochemical degradation - the leading cause of hose failure
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications
  • Temperature rating: -40F to 275F (-40C to 135C) in coolant hose applications

Product Details

HVAC Heater Molded Hose (18011) by Gates®. Location: Heater to Engine. Inside Diameter: 0.25". Size: 1/4" x 15 19/32". Gates molded heater molded hose is manufactured to fit specific applications. Similar to OEM specifications. Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Installation

When you need to repair your climate control system you can battle the traffic and stand in line at the auto parts chain store, only to be told that what you need is out of stock and has to be ordered. And even if we have the parts can you be assured of the quality? Do you recognize the name on the box? And how do you know if you’re getting the best price?

You won’t have those concerns with the replacement climate control parts offered on our website. Website carries only top name products from well-known OE and aftermarket suppliers. In fact, many of the manufacturers we deal with are suppliers to the vehicle manufacturers, so the parts you get may be the same as the ones that came on your car or truck. In our online store you can find all the major A/C system components like compressors, condensers, evaporators, accumulators and receiver-driers, as well as the no less important small parts like pressure and temperature switches, seals, expansion valves and orifice tubes. Our online store is also your source for heating system parts like heater cores, blower motors, resistors and cabin filters. And unlike many other online vendors, our website doesn’t just have the big items and let you scramble for the details. Website carries everything needed to complete the job, including antifreeze.

Brand:
Part Number:
18011
UPC:
072053178012
Alternate MPN:
18011, G2021-244471
OE Numbers:
1786

Reviews

(12)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-10 of 12 Reviews
5 of 5
Heater Hose
Product works fine, was a little bit long compared to the original, wasn't sure if it was going to work but I made it fit.
Posted by Jason (La Salle, IL) / September 05, 20182007 Ford Expedition
5 of 5
Gates Quality
I used these hoses for my hot rod. I have a 1950 Ford blown Flathead motor in my 1935 Ford Coupe and they fit and function perfectly!
Posted by Joe (Saddle Brook, NJ) / May 14, 20201990 Chevy Caprice
5 of 5
Ok Replacement
The hose was about 1" shorter than the original, but it fit well and didn't seem to matter. Other than that, it was the correct hose with bends in the right places.
Gates® W0133-1862871-GAT - Engine Coolant Molded Radiator Hose
Posted by Michael (Boulder Creek, CA) / August 12, 20181999 Ford E-series
5 of 5
5 Stars for the Service
I have no doubt my experience was wonderful.
Posted by Jose (Kissimmee, FL) / August 02, 20182007 Mitsubishi Outlander
5 of 5
Decent Hose, Good Price
Great price on these. Had an issue with the lower hose of the same brand, but the upper one seems okay.
Gates® 22463 - Engine Coolant Molded Radiator Hose
Posted by Hermanus (Orange Park, FL) / June 25, 20181996 Chevy Corvette
4 of 5
Gates Coolant Hose 22260
Gates hose made in USA, the hose look little bit small than the OEM and it does have good quality rubber.
Posted by Danny (Fountain Valley, CA) / July 15, 20171998 Toyota 4Runner
4 of 5
Okay
It was all good.
Posted by Steve (Aurora, IL) / November 10, 20162007 Toyota Camry
5 of 5
1986 Cressida Upper Radiator Hose
Trimming was necessary as expected and it was a perfect fit.
Posted by Garry (Biddeford, ME) / January 20, 20161985 Toyota Cressida
5 of 5
1986 Toyota Cressida Radiator Hose
This is a perfect fit for the application.
Posted by Garry (Biddeford, ME) / January 20, 20161985 Toyota Cressida
5 of 5
Personal Adviser, 13 Year Old ?ar
It is great having your own personal adviser that you can go back to time and time again. Who knows you and your car and knows enough to give you some advice if needed. I have gotten several parts from TRUCKiD and have not been disappointed. You can choose your part, the quality you need at the price you want. I just bought some radiator hoses and was able to choose the quality that I wanted. The shipping is fast and if you do have a problem they get on it fast to resolve it. Ya I could go to a parts store but a lot of times it is a hassle. Wrong part, does not fit, out of stock, or the boob behind the counter doesn't know a left handed monkey wrench from a 7/16 boxed end wrench. Jim.
Posted by James (Kansas City, MO) / April 29, 20152002 Mercury Grand Marquis

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!