Gates® 19752 - Engine Coolant Hose

12 reviews|Item # mpn126107396
Vehicle Specific
    Select Vehicle
    Replaces Original (OE) Part #:3212
    Authorized Dealer
    $24.33
    In Stock (20) - Ships Tomorrow 06.11.26
    See similar products
    Have a Question? Ask a Specialist
    888-903-4343Live Chat

    Vehicle Fitment

    Infiniti
    Nissan

    Specifications

    9839
    Yes
    9845
    0
    Branch Quantity
    0
    Centerline Length
    19.4 in
    Centerline Length
    493 mm
    End 1 Inside Diameter
    .75 in
    End 1 Inside Diameter
    19 mm
    End 2 Inside Diameter
    .75 in
    End 2 Inside Diameter
    19 mm
    Material
    EPDM

    Features

    • Has all the quality features of Gates Molded Coolant Hose
    • Inside diameters range from 1/4" to 1"
    • Temperature Range: -40°C to +135°C (-40°F to +275°F)
    • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
    • Engineered to resist electrochemical degradation - the leading cause of hose failure
    • Meets SAE 20R3 EC Class D1

    Product Details

    Engine Coolant Hose by Gates®. Location: Auxiliary Water Pump, Outlet. Gates Small Inside Diameter, or I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, and is approved for marine applications.

    Installation

    Gates® - HVAC Heater Molded Hose Installation Instructions

    The cooling system of your automobile is vital to your engine's overall health and longevity. That is why it’s critical to replace leaking, malfunctioning, cracked or otherwise damaged cooling parts and components in time. Without proper cooling, your engine can crack and seize up, which can lead to engine damage. To save your energy, time and money, get the superior OEM parts they offer for your vehicle. Each product is made from high quality materials to maintain proper cooling of your engine and prevent overheating.

    Gates® - Hydraulic Introduction InformationGates® - HVAC Heater Molded Hose Installation InstructionsGates® - Engine Coolant GuideGates® - Engine Coolant System ManualMade In USAGates Authorized DealerCatalogWarrantyAbout us
    Brand:
    Gates
    Part Number:
    19752
    UPC:
    072053515787
    OE Numbers:
    3212

    Reviews

    (12)
    Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
    /5
    1-10 of 12 Reviews
    5 of 5
    Gates Quality
    I used these hoses for my hot rod. I have a 1950 Ford blown Flathead motor in my 1935 Ford Coupe and they fit and function perfectly!
    Posted by Joe (Saddle Brook, NJ) / May 14, 20201990 Chevy Caprice
    5 of 5
    Heater Hose
    Product works fine, was a little bit long compared to the original, wasn't sure if it was going to work but I made it fit.
    Posted by Jason (La Salle, IL) / September 05, 20182007 Ford Expedition
    5 of 5
    Ok Replacement
    The hose was about 1" shorter than the original, but it fit well and didn't seem to matter. Other than that, it was the correct hose with bends in the right places.
    Gates® W0133-1862871-GAT - Engine Coolant Molded Radiator Hose
    Posted by Michael (Boulder Creek, CA) / August 12, 20181999 Ford E-series
    5 of 5
    5 Stars for the Service
    I have no doubt my experience was wonderful.
    Posted by Jose (Kissimmee, FL) / August 02, 20182007 Mitsubishi Outlander
    5 of 5
    Decent Hose, Good Price
    Great price on these. Had an issue with the lower hose of the same brand, but the upper one seems okay.
    Gates® 22463 - Engine Coolant Molded Radiator Hose
    Posted by Hermanus (Orange Park, FL) / June 25, 20181996 Chevy Corvette
    4 of 5
    Gates Coolant Hose 22260
    Gates hose made in USA, the hose look little bit small than the OEM and it does have good quality rubber.
    Posted by Danny (Fountain Valley, CA) / July 15, 20171998 Toyota 4Runner
    4 of 5
    Okay
    It was all good.
    Posted by Steve (Aurora, IL) / November 10, 20162007 Toyota Camry
    5 of 5
    1986 Cressida Upper Radiator Hose
    Trimming was necessary as expected and it was a perfect fit.
    Posted by Garry (Biddeford, ME) / January 20, 20161985 Toyota Cressida
    5 of 5
    1986 Toyota Cressida Radiator Hose
    This is a perfect fit for the application.
    Posted by Garry (Biddeford, ME) / January 20, 20161985 Toyota Cressida
    5 of 5
    Personal Adviser, 13 Year Old ?ar
    It is great having your own personal adviser that you can go back to time and time again. Who knows you and your car and knows enough to give you some advice if needed. I have gotten several parts from TRUCKiD and have not been disappointed. You can choose your part, the quality you need at the price you want. I just bought some radiator hoses and was able to choose the quality that I wanted. The shipping is fast and if you do have a problem they get on it fast to resolve it. Ya I could go to a parts store but a lot of times it is a hassle. Wrong part, does not fit, out of stock, or the boob behind the counter doesn't know a left handed monkey wrench from a 7/16 boxed end wrench. Jim.
    Posted by James (Kansas City, MO) / April 29, 20152002 Mercury Grand Marquis

    Questions and Answers

    (0)
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!