Name: Ken-Tool® - Pilot Sleeve™ Polyamide Wheel Centering Sleeves
Brand: Ken-Tool
SKU: 2935660477

Product Details

Universal Pilot Sleeve™ Polyamide Wheel Centering Sleeves by Ken-Tool®. Over time, the pilots on the hub can lose tolerances originally intended from the factory, allowing an offset between the wheel and the hub bearing. Polyamide Wheel Centering Sleeves take up the gap between the 22mm stud and the 26mm wheel opening, realigning the wheel to the TRUE CENTER of the hub bearing.

Features

No warranty
Will operate at its full efficiency for years ahead
Easy to use and will dramatically increase safety
Designed by professionals for professionals and DIYers alike

Just one part number services all hub-piloted wheels with 22mm studs, including steering wheels, drive wheels, steel wheels and aluminum wheels. Takes up the gap between 22mm stud and the 26mm wheel opening; Works in conjunction with OEM style two-piece flange nuts; easy to inventory; installs in seconds; Self-sizing; old and new wheels, steel & aluminum; Made from high-impact polyamide material; non-corrosive; Patent pending. Use KEN30630 when installing Pilot Wheel Centering Sleeve on inside dual wheels.

The Ken-Tool® history began in 1920 when John A. Kennedy, self-proclaimed tire changing champion of the world, invented the Pacific Rim Tool. This revolutionary tire changing tool, endorsed by the B. F. Goodrich Company, began selling to garages and tire shops throughout the country. Today, Ken-Tool® is the leading manufacturer of tire service tools in the world. Headquartered in Akron, Ohio, Ken-Tool has been providing the tire industry and automotive aftermarket with quality products for over 90 years. Housed in a 75,000 square foot facility, Ken-Tool is a primary engineer of product, with its manufacturing expertise centered around drop hammer, upsetter, and press forging.

Brand:

Ken-Tool

Part Number:

30631 30633 30632

Warranty

Limited Lifetime Warranty: Ken-Tool believes all its customers should be satisfied with the performance, quality and workmanship of whatever product they buy. Each Ken-Tool branded product (except Vises, Torque Sticks and Specialty Sockets) is sold with a Limited Lifetime Warranty for the original purchaser for as long as Ken-Tool continues to manufacture that product. Ken-Tool products are warranted against defects in materials and workmanship. Any Ken-Tool branded product which fails to perform its intended function, due to a defect in workmanship or material will, at Ken-Tool’s option, be replaced or repaired free of charge. Warranty claims for items that have been broken or are no longer useful due to normal wear, misuse, abuse, alteration, grinding, or heating, will not be honored.

Vises: All current Ken-Tool vises are warranted for a period of one (1) year with proof of purchase. In most cases, the broken or defective part will be replaced free of charge within the first year for the original purchaser. In no case will complete vises be warranted without prior authorization from Ken-Tool. Ken-Tool vises have lifetime warranties on their back and front castings, and on their base plates. Jaw faces, screws, main vise nuts and other parts of the vise do wear out and are only warranted for one (1) year.

Torque Sticks/Extensions and Specialty Sockets: Individual torque sticks, torque extensions and specialty sockets have a limited lifetime warranty with the exception of the thin-wall sockets. Thin-wall sockets are, by design, weaker than the regular wall socket and therefore deemed a wear item with no warranty without prior authorization. All warranty claims must include proof of purchase and are for the original purchaser only. Under no circumstances will entire sets be warranted.

Special Note: Some items, such as hammer handles are subject to normal wear and tear, abuse and misuse and are not warranted.

Warranty Codes: All Ken-Tool items have a warranty code assigned. Refer to the codes below for warranty adjustment guidelines.

A. Limited Lifetime Warranty against defects in materials and workmanship as stated above for the original purchaser.

B. Normal wear and tear item, no warranty without prior authorization.

C. Warranty limited to (1) year from customer purchase date. Proof of purchase required.

D. Warranty limited to ninety (90) days from customer purchase date. Proof of purchase required.

E. Lifetime warranty on front, back, and base plate castings on vises. Other components limited to one (1) year, proof of purchase required.

F. Hammers and handles are not warranted if the handle is broken. Actual defects in material or workmanship must exist in the steel head only. Replacement handles are available.

G. Item warranted for one (1) year and must be returned to Ken-Tool for repair or replacement at Ken-Tool’s option. Proof of purchase required.

H. Normal Ken-Tool warranty against defects in materials and workmanship on individual components. Component replacement parts are available. Entire product, kit, or assortment will not be warranted if only one or more component requires warranty.

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Ken-Tool® - Pilot Sleeve™ Polyamide Wheel Centering Sleeves