Features
- Mates the aftermarket stereo with car wiring harness
- Allow seamless integration of custom stereo with vehicle
- Secure connection to existing connectors avoids splicing
- Pin-to-pin compatibility
- Color-coded wires
- Plugs into Pre-Amp Harness at radio to be used with 70-1704
- One 20-pin plug and one 10-pin plug connected together by jumper harness
- 1.5K Ohm resistor can be used on the amp-remote wire to eliminate turn-on pop
- Plugs into pre-amp harness and into speaker harness at amp
- Allows for the installation of an aftermarket radio using the existing factory wiring and connectors
- No cutting of factory wiring needed
- Compatible with select Ford vehicles with premium sound systems
Product Details
Wiring Harness with Amplifier Bypass Plug (70-5513) by Metra®. For aftermarket stereo. Metra preassembled wiring harnesses can make your car stereo installation seamless, or at least a lot simpler. With precrimped ends and prepopulated connectors, your wiring task will be highly simplified. These harness connectors will mate with your components exactly like the OEM connectors.
Connections:
- Green - Left Rear Speaker (+)
- Green with Black Stripe Left Rear Speaker (-)
- White - Left Front Speaker (+)
- White with Black Stripe - Left Front Speaker (-)
- Purple - Right Rear Speaker (+)
- Purple with Black Stripe - Right Rear Speaker (-)
- Gray - Right Front Speaker (+)
- Gray with Black Stripe - Right Front Speaker (-)
Installing a custom stereo into a modern car can be a nightmare. Make your life easier by using a custom prewired harness from Metra. With preassembled connectors that mate with OEM connectors on the vehicle or your aftermarket electronics, making proper pinout is a breeze. Minimize hand crimps and splicing, especially in the cramped spaces inside the instrument panel or under the dash. Color-coded wires are easy to trace, making for fewer mistakes.