Pop & Lock® PL85407 - Manual and Power Combo Kit with BOLT® Codeable Lock

I followed the coding instructions and had success making it work with my truck key. 5 months later and the lock will open without me even putting the key a cm deep. Any key can turn it to unlock it now making it useless as a lock and only a visual detterent. The locking feature still works only with my truck key all the way in, which is ironic. I'm not sure if there's a warranty or not but I'd love to try a new one out in the hopes I got a bad apple.

Installed this on a used Tacoma, I recently purchased and it replaced an older manually locking Pop and Lock handle. This model is powder coated metal instead of plastic like the old one; however, many of the internals still use plastic, specifically the plunger that automatically unlocks the lock and the trigger on the handle itself to open the handle. I've only had it installed for a few days so time will tell, I used plumbers grease on all the internal plastic functioning pieces. In addition, I had to order a separate mounting bracket to fit my factory camera (Pop and Lock customer service verified this for me). The older handle I replaced had a completely different mounting bracket for the camera. Install is pretty easy, but takes time if you haven't done it before. I wired it to the passenger side so it isn't always cycling when I unlock the driver door. If you can change your own oil, you can definitely install this, just plan on 4-6 hours. I've read several "negatives" about how loud it is when working, and that is because the tailgate itself is hollow and doesn't have much padding (if you have any extra Dynamat around, it would cut down on the noise). I don't really mind the sound, because I can confirm it is locking. Overall, satisfied so far!

I am very satisfied with the purchase since the product is of good quality and also the service.

Easy installation. Only difficulty need more tie raps for the long bed Tacoma.

I bought this lock about 2 years ago and it is still working get. The install took so time because of the wiring but it works great with my factory push button locking system. I would recommend it!

I installed my Pop and Lock with no problems at all. The quality of the product is excellent and it works great with my remote keyless for my truck. I would suggest this product to anyone looking for a keyless tailgate lock.

Overall the Pop and Lock does what it says it will do. It seems to work with authority and while it may be a little loud it doesn't sound flimsy. I wired mine to the passenger side so keep the cycle count down, as others have suggested. I routed it through the A/C drain tube hole. When you close your tailgate you will hear a vibrating sound like flicking a spring door stop. Could probably use 2 sided tape and some foam between the locking mechanism and the tailgate wall to prevent this. Very satisfied so far and very impressed with TRUCKiD customer service and shipping speed.

Works great, truck is now secured.

The product is easy to install and of great quality. I asked the dealership and said that the lock would cost $275 and 300 to installed. I saved a lot of money and had a great time installing it! Just look at the video in YouTube!

This is a must have accessory! The installation was simple and easy to follow (watch some YouTube videos). I tapped my wire connection into the passenger side wire harness for the 2 stage locking on my F-150. I love this product!!