Bestop® 75503-15 - TrekStep™ Flip Down Rear-Mount Truck Bed Step

12 reviews|Item # mpn5226322809
Vehicle Specific
    Select Vehicle
    Authorized Dealer
    $329.99
    In Stock (1) - Ships within 24 hrs
    See similar products
    Have a Question? Ask a Specialist
    888-903-4343Live Chat

    Vehicle Fitment

    Ford

    Features

    • Provides convenient access to the rear of the truck bed, with the tailgate up or down
    • Spring loaded step drops down with the push of a foot when access to the truck bed is needed
    • Retracts up under the bumper with a push of the foot for a cleaner look and increased ground clearance
    • Provides about 6" to 8" inches of downward extension depending on the application
    • Extruded aluminum step has non-skid, textured black powdercoated surface for sure footing in any weather
    • Leaves hitch free for trailer or other accessories
    • Rugged, maintenance-free aluminum and stainless steel construction
    • Bolts to frame with no drilling required
    • Comes with hardware and installation instructions
    • Limited 3-year/100,000-mile warranty

    Product Details

    TrekStep™ Flip Down Rear-Mount Truck Bed Step by Bestop®. Finish: Textured Black. Get easy access to the rear of your truck bed with the TrekStep. The spring loaded TrekStep extends and out to the side with a push of your foot when it's needed, and retracts up under the bumper with another push when it's not. With linkage made of high strength, die-cast aluminum alloy, and the step made of high strength extruded aluminum with a powdercoated, non-skid stepping surface, the TrekStep mounts to the truck frame with no drilling required. The rear mount TrekStep can hold up to 300 lbs.

    If you'd like to be able to step right up into your truck bed with the tailgate down, and have easy access to the bed with the tailgate up, you need a TrekStep. The TrekStep is the easy to use answer to convenient truck bed access that drops down 6" and out to the side with the push of your foot, and back up out of the way after use with another push. And unlike receiver hitch mounted steps, the rear-mount TrekStep leaves the receiver hitch available for towing or other hitch mounted accessories. The rear-mount TrekStep has a 300 lb. load capacity.

    To prevent wet or muddy shoes and boots from slipping, the extruded aluminum step has a non-skid textured black powdercoated finish. The aluminum alloy and high strength steel linkage bolts directly to the frame, with no drilling required. The TrekStep comes with all necessary hardware and comprehensive, illustrated installation instructions. It's covered by a limited 3-year/100,000-mile warranty against defects in materials and workmanship.

    Bestop® - WarrantyBestop® - FAQBestop® - CatalogsBestop Authorized Dealer
    Brand:
    Bestop
    Part Number:
    75503-15
    UPC:
    077848143251
    Alternate MPN:
    7550315

    Reviews

    (12)
    Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
    /5
    1-10 of 12 Reviews
    5 of 5
    So Far So Good
    Installation is pretty straight forward. With proper tools at the most it shouldn't take more than 30 minutes. Design and functionality seems good. I'm little leary of the spring(s) being strong enough to hold it up when driving so we will see. It's definitely easier to climb into the bed. I got bad knees which was why I purchased it. FYI: if you have an aftermarket bumper you will need to source hardware. It uses the factory nuts, but the hardware my aftermarket bumper came with is a large diameter. I needed roughly 1/2" longer bolts to fit the washer and ensure enough threads.
    Bestop® 75306-15 - TrekStep™ Flip Down Rear-Mount Truck Bed Step
    Posted by Justin (Macon, MO) / October 09, 20202017 Ram 2500
    4 of 5
    Pay to Have it Done
    Great step. I bought this to save a hundred dollars or so. I think the YouTube says 30 minute installation. Plus 2.5 hours and a LOT of cussing. Only two frame bolts to replace, but the they were located in a channel the holds the back bumper. Had to use tape on the wrench to hold the nuts in place while contorting myself so install the bolts. 3.25 hours. Might be easier if I was 20 yrs younger. Or, if I was I'd screw something up by throwing things in frustration. But, Nice step once installed. Next time I'd spend the hundred to have someone else do it.
    Bestop® - TrekStep™ Flip Down Rear-Mount Truck Bed Step
    Posted by Customer / August 26, 20202018 Ford F-150
    5 of 5
    Great
    Works great. Makes it much easier to great in and out of the truck box. Everyone who sees it wants to try it out.
    Bestop® - TrekStep™ Flip Down Driver Side Rear-Mount Truck Bed Step
    Posted by Customer / August 09, 20202020 Ford Ranger
    5 of 5
    I Really Like It
    Great product. Very easy to install.
    Bestop® 75313-15 - TrekStep™ Flip Down Driver Side Rear-Mount Truck Bed Step
    Posted by James / June 05, 20202020 Dodge Ram
    5 of 5
    Fit Perfectly!
    Appears to be a quality made piece of equipment, time and use will be the real test. Instructions were pretty easy to follow.
    Bestop® - TrekStep™ Flip Down Driver Side Rear-Mount Truck Bed Step
    Posted by Nathan (Rose Hill, KS) / April 12, 20192007 Toyota Tundra
    4 of 5
    Great Product, Easy Install
    This step is a great addition to your truck. Appears very well made and designed. Very easy to install. The only issue was the condition of the package from the shipping. Package/box was torn up real bad. All the parts were there but the box was wide open when I received it.
    Posted by John (Wilton, NH) / December 13, 20182008 Chevy Silverado 1500
    4 of 5
    Very Convenient
    When I first saw the advertisement I knew this was an accessory I needed to have. Installation was relatively easy. The brackets bolted up to existing holes and studs in the bumper and frame. The product performs as advertised except the location of the step is almost directly below the left edge of the tailgate and for ease of utilization I had to slide the step on the mounting bracket all the way to the left. Without the step moved all the way to the left, it would come in contact with the tailpipe. Durability will be time tested as I weigh in at 230# and when I position my foot on the step it is on the outside edge. Hope this holds up over time.
    Bestop® 75310-15 - TrekStep™ Flip Down Rear-Mount Truck Bed Step
    Posted by James (Denton, TX) / June 29, 20172011 Ram 1500
    5 of 5
    Truck Step
    The product was what I was looking for and was very easy to install.
    Bestop® 75310-15 - TrekStep™ Flip Down Rear-Mount Truck Bed Step
    Posted by Ronald (Gambier, OH) / June 16, 20172011 Ram 1500
    5 of 5
    Well Worth The Price
    Looks more expensive, still new, but workings is really smooth real quality.Instructions and installation was a snap would have taken only five minutes to install, but I had to buy a 13mm deep socket. Would highly recommend.
    Posted by Ernest (Alamogordo, NM) / July 22, 20152004 Chevy Silverado
    5 of 5
    Great Addition To The Truck
    Very well made and very strong. Fit perfectly and installed in minutes. Lots easier to step into the bed when the tailgate is down.
    Posted by Ralph (Davis, CA) / July 22, 20152009 Dodge Ram

    Questions and Answers

    (0)
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!