Lund® SX202T - Elite Series SX-Sport Style Textured Black Front and Rear Fender Flares

I purchased flares for strength and am Very happy with them. They are very easy to mount and sturdy enough to withstand day to day use, both on and off road. They are great if you don't want to alter the vehicles existing fender well lines. I would definitely recommend these to anyone looking to add flares to their vehicle.

Poor design and fit. They are molded properly, but on the rear fenders it takes incredible force to position and the clips don't hold in place plus the rubber seal won't stay on. The front trim pieces are not tight enough and would not stand wind forces plus two of the 6 screw holes are not there. I expect a lot more from Lund. Returned as unusable and do not fit properly.

Installed these on a 2017 Tacoma, 4 door, non 4 wheel drive. Some minor modifications were required to make it fit such as elongating the factory rectangular holes on one spot of each flare. The biggest problem was figuring out which way the rubber stripping faced, put the double lines out (printed on the rubber), the instructions will fool you.

To be honest, I love the product. To install took hours and cut fingers and sore hands for days after. The rubber seal was separate and very difficult to adhere to the plastic fender. Also, the attachment clips/pins are barely long enough and a-lot can break and they do not provide ample spare screws to attach fender to wheel well. Lastly, the amber plastic lights did not fit and I had to file down plastic with my tools to enable a fit. Even now I have to be careful washing the truck bc the amber lights stick out of mold housing and can be caught and pulled out with minimal force. I recommend having the rubber seal built into the plastic fender as well as the lights.

These fender flares look great on my truck and make it stand out!

Doesn’t fit properly. Too wide and covers gas cap.

The flares are good quality and TRUCKiD is a good company. The problem is installation. After waiting months for delivery due to Lund postponing release over and over, they arrived with incorrect instructions hardware. I called Lund and after hours of calks, emails, emailed pictures; they either don't care, or are incompetent. Maybe they're both. Anyway, buy a different brand (suggested), or be prepared to buy 20 bucks worth of yourbown hardware.

This flare set is a well-built product that installed without issues. The speed that they arrived really surprised me( on my door in 9 days). Thanks, TRUCKiD. Nice job.

The rubber trim around the fender flares kept coming off. It is my opinion, these should be either factory installed or make the groove a bit deeper. Even after installation was completed I had to remove the fender flare on the driver side. The rubber kept coming off just beneath the gas tank cap (door) where it curves around the cap (door). I also had to remove my splash guard in order to install the fender flares. Other than that it was relatively easy to install and I love the way it looks.

Install was easy.