Features
- Mates the aftermarket stereo with car wiring harness
- Allow seamless integration of custom stereo with vehicle
- Secure connection to existing connectors avoids splicing
- Pin-to-pin compatibility
- Color-coded wires
- Non-amplified radio to factory amplifier integration
- OEM Radio integration
- Takes OEM Radios that do not need the factory amplifier and allows you to install it into vehicles that have the factory amplifier
- One 8-pin power plug, one 8-pin speaker plug and an amp bypass jumper
- 1.5K Ohm resistor can be used on the amp-remote wire to eliminate turn-on pop
- Allows for the installation of an aftermarket radio using the existing factory wiring and connectors
- No cutting of factory wiring needed
Product Details
Aftermarket Radio Wiring Harness by Metra®, with OEM Plug and Amplifier Bypass for Old Radio. For Non-Amplified aftermarket Radio. Metra preassembled wiring harnesses can make your car stereo installation seamless, or at least a lot simpler. With precrimped ends and prepopulated connectors, your wiring task will be highly simplified. These harness connectors will mate with your components exactly like the OEM connectors.
Installing a custom stereo into a modern car can be a nightmare. Make your life easier by using a custom prewired harness from Metra. With preassembled connectors that mate with OEM connectors on the vehicle or your aftermarket electronics, making proper pinout is a breeze. Minimize hand crimps and splicing, especially in the cramped spaces inside the instrument panel or under the dash. Color-coded wires are easy to trace, making for fewer mistakes.