Spyder® PRO-JH-TTA16-SR-BSM - Driver and Passenger Side Black/Smoke Sequential LED Light Tube Projector Headlights

Installed this on my 2018 and found out that the DRL lights during the day time is barely visible. Also this headlights uses halogens which makes it even harder to see at nights.

I purchased my headlights about 10 months ago and have had them on my truck for about 9 months. Although they look great, the film on the driver side headlight started to peal in a small area from normal wear and tear. My truck is garage kept and had only been driven about 6k miles in the last year. Recently the entire headlights coating has began to flake off in what seems to be every area of the light. Very disappointed in the quality as the lights appearance is great.

Got headlights installed and look great. Many compliments!, I did change out the stock H7 halos to LED H7 bulbs to make them a perfect product for me

These are great but they can use improvement. I wish I new about the LED vs Halogen issue. But they do give the truck a nice look. I was able to make them work with what I have. I do recommend if you are not picky. If so, you might want to look else where

I put these lights in my 2018 Tacoma and love they outward appearance of them during the day. The smoke tint, the top side daytime running light, and timed turn signals look absolutely awesome. Unfortunately all of this gets offset when you actually turn the headlights on at night and get that ugly yellow dim color of the halogen bulbs used for the high and low beams. I even called the company to ask about putting LEDs or dare I say HID bulbs in, but was told it would void the warranty and likely result in poor light output, performance, and/or fitment issues. A good start to what could be a great product, but the halogen bulbs have to go. I'd highly recommend passing on these and holding out for an all LED inclusive package.

Maybe I'm new at this, but I thought that I was going to have a full LED setup, so it was a surprise to need to run to the autoparts store to make these exactly what I wanted. However, since it is an Odyssey, these headlights didn't have much competition.

Very attractive looking with good brightness. Definitely recommend.

Way brighter than stock. I sealed them with silicone before installing (just to be safe) and after three months they're still holding up great. My F150 looks so much better with these headlights!

I put these headlights on my 2020 F150 They're bright and the smoked look is awesome. the light output is great for night driving. Highly recommend!

2013 F250 FX4 Lariat, full review I ordered these headlights after months of research.. first things first. The initial set arrived and I installed them to discover that one of the high beams was not working at. TRUCKiD customer service was an huge help and a new item was shipped to me directly from the manufacturer. The new set worked perfectly. so far. The lights seem to be made with good quality materials and have the look of being very high-end. I have received multiple compliments on them, including from my wife, and that is a hard one to get, believe me lol. The c-bar running light is visible during the day, but very bright and distinctive when not in direct sunlight. It is a smooth continuous light, with no dots or where it looks like 15 individual bulbs. The sequential blinker looks awesome, smooth bright sequencing and very visible in daylight and dark. The headlights and high beams provide plenty of light and illuminate much better than stock without blinding every single car coming my way, if they’re adjusted right. The top adjusting screw adjusts up and down on the low beams, and the bottom adjusting screw adjust up and down on the high beams. I discovered that there is no adjustment for side to side, but I found no need for that, the lights project across a wide area. The high beam adjustments must be made with the light housing out of the truck, you cannot reach it when it is installed. I made a small adjustment, popped the housing back in place, removed it again made more adjustment, and so on. It was a little tedious, but not difficult. Once everything was lined up, I completed the install. These look amazing on my truck, and I’m hoping that they last a long time. I matched the lights with raxiom sequential mirror marker lights bought from AmericanTrucks.com, The matching c-bar headlights and taillights make this thing look like a 10 year newer truck.